Projects

Ongoing Projects

  • A university-industry collaboration project has been initiated between Turkish Aerospace (TUSAŞ) and our group, titled Flaw Tolerance Analysis Studies (Effect of Dents, Corrosion Pits, etc.) (İmalat ve Serviste Karşılaşılan Kusurların Parça Ömrüne Etkisi) Project No. 2024-USI-K7010-0104-17

  • Development of Fracture Toughness Calculation Methodologies for Steels Under Neutron Irradiation (Nötron ışınlamasına Maruz Kalan Çeliklerin Kırılma Tokluğu Hesaplamaları Üzerine Metot Geliştirme), 2411, TENMAK FÜZYON TEKNOLOJİLERİ ÇAĞRILARI, 2025 - 2027

  • Modeling of Plastic Material Behavior of Single Crystal Nickel Alloys, University-industry collaboration project between TUSAŞ Engine Industries (TEI) and MCSM Lab, March 2025 - August 2025

  • Modeling the Cold Dwell Fatigue Behavior of Titanium Superalloy Microstructures in Gas Turbine Engine Components (Titanyum Süperalaşımlı Gaz Türbin Motor Bileşenlerine Ait Mikroyapıların Soğuk Bekleme Yorulma Davranışının Modellenmesi), TÜBİTAK 1002-A, 2024-2025

  • Coordination of the European Nuclear Materials Community for Energy Innovation (CONNECT-NM), HORIZON-EURATOM Project, 2024 - 2029, 43 European Partners
  • European Materials Acceleration Center for Energy (EU-MACE), CA22123, 2023 - 2027
  • Agricultural Revitalization in Higher Education Institutions of Asian Countries, ERASMUS-EDU-2023-CBHE, 2023 - 2026

Completed Projects

  • Multiscale Modelling for Fusion and Fission Materials, H2020 (EUATOM) Project, 2017 - 2021, PI, WP3 (Deformation mechanisms at the grain scale in F/M steels) and WP4 (Channelling at the polycrystal scale in F/M steels), 20 European Partners
  • SLIPLOC: SLIP LOCalization in irradiated steels and consequences on mechanical damage, EERA Pilot Project, 2016 - 2020, WP3 (Polycrystal simulations and experimental validation) leader, 10 European Partners (CEA, SCK-CEN, PSI, METU, CIEMAT, JRC-IET, CNRS/GPM-CNRS/CEMHTI, UPC, UA, IMDEA)
  • Modelling of damage initiation and fracture propagation in ductile materials through micromechanically consistent porous plasticity and cohesive zone modeling approaches (Sünek malzemelerde hasar başlangıcı ve kırılma ilerlemesinin mikromekanik olarak tutarlı porlu plastisite ve kohezif alan teknikleri ile modellenmesi), 117M106, TÜBİTAK 3501, 2017 - 2020
  • Strain gradient crystal plasticity modeling of polycrystal metals (Çok taneli metallerin gerinim gradyan kristal plastisite yöntemi ile modellenmesi), 215M381, TÜBİTAK 3001, 2016 - 2017
  • Micromechanical modelling of size dependent plasticity behavior in polycrystalline materials (Çok taneli metallerde buyukluge bagli plastisite davranisinin mikromekanik modellenmesi), BAP-08-11-2016-031, ODTU BAP (METU Scientific Research Project), 2016-2017
  • Plastic microstructure evolution in metallic materials, Marie Skłodowska-Curie actions, (COFUND), 2013 - 2015