• ME 421 Steam Generator & Heat Exchanger Design (Spring 2020)
  
• ME 478 Introduction to Solar Energy Utilization (Spring 2020)
  
• ME 311 Heat Transfer (Fall 2017)
  
• ME 312 Thermal Engineering (Spring 2019)
  
• ME 492 Fuel Cell Fundamentals (Fall 2015)
  
• ME 508 Thermal Radiation (Fall 2019)
  
• ME 570 Advanced Topics in Radiative Transfer (Spring 2016)
  

• Solar Energy
• Computational Heat Transfer
• Radiative Transfer
• Electronics Cooling
• Heat Exchanger Design
• Fuel Cells
• Microchannel Flows
• Computational Incompressible Fluid Dynamics

• ICHMT: International Centre for Heat and Mass Transfer
• EU H2020 INSHIP project
• EU H2020 SFERA-III project
• EU H2020 HorizonSTE project
• XKCD comics

EDUCATION

• Hacettepe University, B.S. in Nuclear Energy Engineering.
• University of Michigan, M.S. in Nuclear Engineering.
• Massachusetts Institute of Technology, Nuclear Engineer Degree and S.M. in Engineering.
• Northeastern University, Ph.D. in Mechanical Engineering.

ACADEMIC POSITIONS

• University of California, Riverside, Lecturer in Mechanical Engineering (8/1997-6/1998).
• Middle East Technical University in Mechanical Engineering (since 9/1998).
• Technische Univ. München, Visiting Professor in Nanoelectronics Institute (9/2010-3/2012).

JOURNAL PUBLICATIONS

The supplied preprint pdfs may be slightly different than the published versions.

• Serdar Hicdurmaz and Ilker Tari, "Numerical investigation of bubbling fluidized bed to be used as thermal energy storage integrated to high temperature CSP," Multiphase Science and Technology, Vol. 30, pp. 99-120 (2018).
• Ender Ozden and Ilker Tari, "Energy and Exergy Analyses of a Solar-Hydrogen Based Energy System for the Emergency Room of a Hospital in Ankara, Turkey". In: Aloui F., Dincer I. (eds) Exergy for A Better Environment and Improved Sustainability 1. Green Energy and Technology. Springer, Cham, pp 779-794 (2018).
• Mehdi Mehrtash, Ilker Tari and Serhat Yesilyurt, "Numerical modeling of visco-elasto-plastic hygro-thermal stresses and the effects of operating conditions on the mechanical degradation of PEFC membranes," Journal of Power Sources, Vol. 396, pp. 164-174 (2018). (pdf)
• Nima Bonyadi, S. Kazim Somek, C. Cihan Ozalevli, Derek Baker and Ilker Tari, "Numerical Analysis of Phase Change Material Characteristics in a Thermal Energy Storage Heat Exchanger," Heat Transfer Engineering, Vol. 39, No. 3, pp. 268-276 (2018). (pdf)
• Mehdi Mehrtash, Ilker Tari and Serhat Yesilyurt, "Impacts of Inhomogeneous Clamping Force on Local Performance and Liquid Water Formation in Polymer Electrolyte Fuel Cells," International Journal of Hydrogen Energy, Vol. 42, No. 30, pp. 19227-19245 (2017). (pdf)
• Ender Ozden and Ilker Tari, "PEM Fuel Cell Degradation Effects on the Performance of a Stand-alone Solar Energy System," International Journal of Hydrogen Energy, Vol. 42, No. 18, pp. 13217-13225 (2017). (pdf)
• Ender Ozden and Ilker Tari, "Energy-exergy and economic analyses of a hybrid solar-hydrogen renewable energy system in Ankara, Turkey," Applied Thermal Engineering, Vol. 99, pp. 169-178 (2016). (pdf)
• Ender Ozden and Ilker Tari, "Proton exchange membrane fuel cell degradation: A parametric analysis using Computational Fluid Dynamics," Journal of Power Sources, Vol. 304, pp. 64-73 (2016). (pdf)
• Ilker Tari and Mehdi Mehrtash, "Natural convection heat transfer from horizontal and slightly inclined plate-fin heat sinks," Applied Thermal Engineering, Vol. 61, pp. 728-736 (2013). (pdf)
• Mehdi Mehrtash and Ilker Tari, "A correlation for natural convection heat transfer from inclined plate-finned heat sinks," Applied Thermal Engineering, Vol. 51, pp. 1067-1075 (2013). (pdf)
• Ilker Tari and Mehdi Mehrtash, "Natural convection heat transfer from inclined plate-fin heat sinks," International Journal of Heat and Mass Transfer, Vol. 56, pp. 574-593 (2013). (pdf)
• Ilker Tari and Fidan Seza Yalcin, "CFD Analyses of a Notebook Computer Thermal Management System and a Proposed Passive Cooling Alternative," IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 2, pp. 443-452 (2010). (pdf)
• Ender Ozden and Ilker Tari, "Shell side CFD Analysis of a Small Shell-and-tube Heat Exchanger," Energy Conversion and Management, Vol. 51, No. 5, pp. 1004-1014 (2010). (pdf)
• Ilker Tari, "Natural Convection Simulations and Numerical Determination of Critical Tilt Angles for a Parallel Plate Channel," Energy Conversion and Management, Vol. 51, No. 4, pp. 685-695 (2010). (pdf)
• Ilker Tari, "Passive Cooling Assembly for Flat Panel Displays with Integrated High Power Components," IEEE Transactions on Consumer Electronics, Vol. 55, No. 3, pp. 1707-1713 (2009). (pdf)
• Emre Ozturk and Ilker Tari, "Forced Air Cooling of CPUs with Heat Sinks: a Numerical Study", IEEE Transactions on Components and Packaging Technologies, Vol. 31, No. 3, pp. 650-660 (2008). (pdf)
• Omer Emre Orhan and Ilker Tari, "Numerical Investigation on Cooling of Small Form Factor Computer Cases", Engineering Applications of Computational Fluid Mechanics, Vol. 2, No. 4, pp. 427-435 (2008). (open access pdf)
• Emre Ozturk and Ilker Tari, "CFD Modelling of Forced Cooling of Computer Chassis", Engineering Applications of Computational Fluid Mechanics, Vol. 1, No. 4, pp. 304-313 (2007). (open access pdf)

SUPERVISED THESES

• Shadi Salehian M.S. Thesis, 2020, "Simulation of solar thermal application in a cement plant".
• Yankı Çobanoğlu, M.S. Thesis, 2019, "Thermal management of electronics cabinet and effects of different front cover patterns".
• Esra Polat, M.S. Thesis, 2019, "Experimental investigation of fluidized bed to be used as solar thermal energy storage".
• Canberk Õztoprak, M.S. Thesis, 2018, "Effects of microchannel manufacturing inaccuracies on heat sink performance: experimental and numerical investigation".
• Mehdi Mehrtash, Ph.D. Dissertation, 2017, "Numerical modeling and analyses of anisotropic diffusion and stresses in Polymer Electrolyte Fuel Cell".
• Serdar Hiçdurmaz, M.S. Thesis, 2017, "Numerical investigation of bubbling fluidized bed to be used as high temperature thermal energy storage".
• Gözde Başara, M.S. Thesis, 2017, "Mechanical strength of 3D printed objects: Experimental and numerical investigation".
• Rahul Singh, M.S. Thesis, 2017, "Modelling and performance analysis of Linear Fresnel Collector for process heat generation for ice cream factory in Konya", co-supervised by Dr. Baker.
• Evan F. Johnson, M.S. Thesis, 2017, "Conceptual design and heat transfer investigation of a dense granular flow solar receiver", co-supervised by Dr. Baker.
• Anıl Çalışkan, M.S. Thesis, 2015, "Heat dissipation from electronic packages with the help of heat pipe network and its application to rotary platforms".
• Serhat Bilyaz, M.S. Thesis, 2015, "Numerical investigation of circulating fluidized bed riser hydrodynamics for concentrating solar thermal power application".
• Mehmet Erdem Õzet, M.S. Thesis, 2015, "Improving flow structure and natural convection within fin spacings of plate fin heat sinks".
• Mine Kaya, M.S. Thesis, 2015, "Numerical comparison and sizing of sensible and latent thermal energy storage for compressed air energy storage", co-supervised by Dr. Baker.
• Ender Õzden, Ph.D. Dissertation, 2015, "PEM fuel cell degradation: Numerical investigation and effects on the performance of solar-hydrogen based renewable energy systems".
• Koray Taştankaya, M.S. Thesis, 2014, "Development of a methodology for sizing and assessment of wind integrated Advanced Adiabatic Compressed Air Energy Storage System (AA-CAES)", co-supervised by Dr. Baker.
• Fırat Şen, M.S. Thesis, 2012, "Thermal management of Solid Oxide Fuel Cells by flow arrangement".
• Mehdi Mehrtash, M.S. Thesis, 2011, "Numerical investigation of natural convection from inclined plate finned heat sinks".
• Bekir Onur Çolpa, M.S. Thesis, 2011, "Correlation based thermal design of Air Transport Rack chassis".
• Sercan Õzbay, M.S. Thesis, 2011, "Thermal analysis of Stirling cycle regenerators".
• Zafer Erkal, M.S. Thesis, 2011, "Experimental investigation of PCMs used in military shelters".
• Cem Õmür, M.S. Thesis, 2010, "Numerical and experimental investigation of the thermal behavior of a newly developed attitude determination control unit in a vacuum environment", co-supervised by Dr. A.B. Uygur.
• Arman Uluoğlu, M.S. Thesis, 2010, "Solar-Hydrogen stand-alone power systems design and simulations".
• Kamil Mert Çakar, M.S. Thesis, 2009, "Numerical investigation of natural convection from vertical plate finned heat sinks".
• Õzgür Bayer, Ph.D. Thesis, 2009, "Simulation of refrigerated space with radiation", co-supervised by Dr. Oskay.
• Fidan Seza Yalçın, M.S. Thesis, 2008, "CFD Analysis of a notebook computer thermal management solution", co-supervised by Dr. Sert.
• Sinan Küçük, M.S. Thesis, 2007, "A Comparative investigation of heat transfer capacity limits of heat pipes".
• Ender Õzden, M.S. Thesis, 2007, "Detailed design of Shell-and-tube heat exchangers using CFD".
• Bora Timurkutluk, M.S. Thesis, 2007, "Performance Analysis of an intermediate temperature SOFC".
• Õmer Emre Orhan, M.S. Thesis, 2007, "Numerical investigation on cooling of Small Form Factor computer cases".
• Ethem Ersöz, M.S. Thesis, 2006, "Development of a racing strategy for a solar car".
• Tugrul Maral, M.S. Thesis, 2006, "Spectral (h-p) Element Methods approach to the solution of Poisson and Helmholtz equations using MATLAB", co-supervised by Dr. Sert.
• Serkan Kasapoğlu, M.S. Thesis, 2005, "A Pseudospectral Analysis of laminar natural convection flow and heat transfer between two inclined parallel plates".
• Cenk Evren Kükrer, M.S. Thesis, 2005, "Direct Numerical simulation of liquid flow in a horizontal microchannel".
• Emre Õztürk, M.S. Thesis, 2004, "CFD Analyses of heat sinks for CPU cooling with Fluent".