PAPERS

  1. WANG, Z, LIU, J., WANG, H., ZHANG, B., LIU, W, ÖZDEM?R, E. D. and AKSEL, M. H.,Numerical and Experimental Investigation on the Integrate Performance of Axial Flow Cooling Fan and Heat Exchanger, Applied Thermal Engineering (Q4), Early Access Feb. 2023. DOI: 10.1016/j.applthermaleng.2024.122814

  2. BİLGİÇ, M., BARAN O. U. and AKSEL, M. H., Assessment of Effect of Flux Scheme and Turbulence Model on Blade-to-blade Calculations, Journal of Applied Fluid Mechanics (Q4) , Vol. 17, No. 7, pp. 1444-1456, 2024. DOI: 10.47176/jafm.17.7.2234

  3. PANG, M, LIU, J., LIU, W, HAN, C., ÖZDEM?R, E. D. and AKSEL, M. H.,Thermal-and-Energy-Conservation Optimization of the Cooling Plate for IGBT by Field Synergy and Entropy Generation, International Journal of Heat and Fluid Flow (Q4), Vol. 108, 2024. DOI: 10.1016/j.ijheatfluidflow.2024.109453.

  4. BİLGİÇ, M., YASA, T., BARAN O. U. and AKSEL, M. H., Numerical Investigation of Trailing Edge Losses in Transonic ORC Turbines, Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy (Q4) , Early Access Feb. 2023. DOI: 10.1177/09576509231156952.

  5. MENG, L., LIU, J., BI, J., ÖZDEMİR, E. D. and AKSEL, M. H., Multi-objective Optimization of Plate Heat Exchanger for Commercial Electric Vehicle Based on Genetic Algorithm, Case Studies in Thermal Engineering (Q1), Vol. 41 Jan. 2023. DOI: 10.106/j.scite.2022.102629.

  6. LIU, J., MENG, L., LIU, Y., ÖZDEMİR, D. and AKSEL, M. H., Signal-to-noise Ratio Analysis on Saw-tooth Vortex Generator in Vehicle Radiators, Transactions of the Canadian Society for Mechanical Engineering (Q4), March 2022. DOI: 10.1139/tcsme-2022-0050.

  7. ÖZDEN, A., BARAN, Ö. U., AKSEL, M. H. and AK, M. A., SU2 Real Gas Models’ Performance Predictions on a Cold Gas Thruster, Journal of Thermal Sciences and Technology (Q4), Vol. 41, No.1, pp. 77-88, 2021.

  8. KARA, E., KUTLAR, A. I and AKSEL, M. H., Analysis of High Reynolds Number Flow Around a Double Ellipsoid Configuration Using Solution Adapted Navier-Stokes Solver (in Turkish), Dicle University, Journal of Engineering, Vol. 11, No.2, pp. 563-573, 2020. DOI: 10.24012/dumf.536200.

  9. KÜNDEŞ, N. A., AKSEL, M. H. and BARAN, Ö. U., Development of an Automatic Design and Analysis Tool for Axial Compressors, Journal of Thermal Sciences and Technology (Q4), Vol. 12, No.2, pp. 539-549, 2019. DOI: 10.29252//jafm.12.12.29156.

  10. KARA, E., KUTLAR, A. I and AKSEL, M. H.A Navier-Stokes Solver for Compressible Turbulent Flows on Quadtree and Octree Based Cartesian Grids, Journal of Thermal Sciences and Technology (Q4), Vol. 39, No.2, pp. 179-190, 2019.

  11. KARAKUŞ, A., WARBURTON, T., AKSEL, M. H. and SERT, C., An Adaptive Fully Discontinuous Galerkin Level Set Method for Incompressible Multiphase Flows, International Journal of Numerical Methods for Heat and Fluid Flow (Q2), Vol. 28, No. 6, pp. 1256-1278, 2018. DOI: 10.1108/HFF-03-2017-0098.

  12. KARA, E., KUTLAR, A. I and AKSEL, M. H.Shock Wave Capturing with Multi-Grid Accelerated, Solution Adaptive, Cartesian Grid Based Navier Stokes Solver, , Journal of Aeronautics and Space Technologies, , Vol. 9, No. 2, pp. 63-73, 2016.

  13. KARAKUŞ, A., WARBURTON, T., AKSEL, M. H. and SERT, C., A GPU Accelerated Level Set Reinitialization for an Adaptive Discontinuous Galerkin Method, Computers and Mathematics with Applications (Q1), Vol. 72, Issue 3, pp. 755-767, August 2016. DOI: 10.1080/10618562.2016.1155704.

  14. KARAKUŞ, A., WARBURTON, T., AKSEL, M. H. and SERT, C., A GPU Accelerated Adaptive Discontinuous Galerkin Method for Level Set Equation, International Journal of Computational Fluid Dynamics (Q1), Vol. 30, Issue 1, pp. 56-68, 2016.

  15. KARA, E., KUTLAR, A. I and AKSEL, M. H., Development of an Octree-Based Adaptive Cartesian Grid Generator and a Multigrid Euler Solver for the Simulation of Three-Dimensional Inviscid Compressible Flows, Progress in Computational Fluid Dynamics, Vol. 16, No.3, pp. 131-145, 2016.

  16. KARA, E., KUTLAR, A. I and AKSEL, M. H., A Solution Adaptive Cartesian Grid Based Euler Solution for Compressible Flow around BOEING TR-1322 Muti-element Airfoil, Nev?ehir Science and Technology Journal, , Vol. 4, No. 1, pp. 69-80, 2015.

  17. DOĞRU, K., AKSEL, M. H. and TUNCER, İ. H., Parallel Processing of Two-dimensional Euler Equations for Compressible Flows, Modelling, Simulation & Control B, Vol. 77, No. 5, pp. 50-70, 2008.

  18. GÜRDAMAR, E., AKSEL, M. H. and ÇETE, R., Adaptation of Turbulence Models to a Navier-Stokes Solver, Modelling, Simulation & Control B, Vol. 76, No. 6, pp. 50-64, 2007.

  19. DİNÇGEZ, U. C., AKSEL, M. H. and ÇETE, R., Two-dimensional Hyperbolic Grid Generation, Advances in Modelling, Vol. 44, No. 2, pp. 47-66, 2007.

  20. ÖZDEMİR, E. D., AKSEL, M. H. and ŞİŞMAN, T. Ç., Implementation of Rotation into a Two-dimensional Euler Solver, Modelling, Simulation & Control B, Vol. 76, No. 6, pp. 1-19, 2007.

  21. HALİLOĞLU, U. and AKSEL, M. H., Object-Oriented Approach for the Solution of the Navier-Stokes Equations, Modelling, Simulation & Control B, Vol. 75, No. 6, pp. 1-20, 2006.

  22. MUŞTA, M. N. and AKSEL, M. H., Implementation of One Equation Turbulence Models into a Navier-Stokes Solver, Modelling, Simulation & Control B, Vol. 75, No. 6, pp. 61-81, 2006.

  23. ERDOĞAN, E., AKSEL, M. H. and TINAZTEPE, T., Multi-Block Navier-Stokes Solver for Solid Propellant Rocket Motors, Modelling, Simulation & Control B, Vol. 75, No. 3, pp. 45-66, 2006.

  24. ELKHOURY, M. and AKSEL, M. H., A Three Dimensional Object-Oriented Navier-Stokes Solver Using Two-Equation Turbulence Models, Modelling, Simulation & Control B, Vol. 73, No. 2, pp. 1-24, 2005.

  25. YILDIRIM, C. and AKSEL, M. H., A New Technique for the Grain Burnback Analysis in the Design of a Solid Propellant Rocket Motor, Modelling, Simulation & Control B, Vol. 74, No. 2, pp. 53-71, 2005.

  26. GENÇ, B. Z. and AKSEL, M. H., Implementation and Comparison of Turbulence Models on a Flat Plate Problem Using a Navier-Stokes Solver, Modelling, Simulation & Control B, Vol. 74, No. 8, pp. 43-64, 2005.

  27. SERT, C., AKSEL, M. H. and DENER, C., Object-Oriented Multi-Block Approach for the Solution of the Euler Equations, Modelling, Simulation & Control B, Vol. 73, No. 3, pp. 1-24, 2004.

  28. YALIM, S. and AKSEL, M. H., Development of a Two-Dimensional Object-Oriented Navier-Stokes Solver by Using Total Variation Diminishing (TVD) Method), Modelling, Simulation & Control A, Vol. 77, No. 3, pp. 1-22, 2004.

  29. SEZAL, İ. H. and AKSEL, M. H., Solution of Two-dimensional Euler Equations by Using First Order Roe Scheme on Unstructured Grids, Advances in Modelling A, Vol. 41, No. 1 pp. 1-22, 2004.

  30. ALPAN, B. and AKSEL, M. H., Simulation of Three-dimensional Inviscid Flow Inside Rocket Engine Nozzles, Modelling, Simulation & Control B, Vol. 73, No. 1 pp. 1-22, 2004.

  31. UÇAR, G. and AKSEL, M. H., Development of a Three-dimensional Navier-Stokes Solver for Laminar and Compressible Flows by using Finite Volume Method, Modelling, Simulation & Control B, Vol. 72, No. 8, pp. 17-36, 2003.

  32. EROL, Ö. and AKSEL, M. H., Development of an Euler Solver for Compressible Flows Using Finite Volume Method, Modelling, Simulation & Control B, Vol. 72, No. 8, pp. 37-56, 2003.

  33. YARDIMCI MUTAF, Ö. and AKSEL, M. H., A Two-dimensional Euler Solver Using Finite Volume Method for Internal Flows, Modelling, Simulation & Control B, Vol. 71, No. 8, pp. 1-22, 2002.

  34. AKSEL, M. H. and KAYA, M. T., A Numerical Simulation of the Axisymmetric Vortex Breakdown in a Tube, Applied Mathematical Modelling, Vol. 16, No. 8, pp. 414-422, August 1992.

  35. AKSEL, M. H. and TURHANGİL, T., A Finite Element Simulation of Frontogenesis with a Horizontal Deformation Model by Using Semi-Implicit Time Integration Scheme, Modelling, Simulation & Control B, Vol. 34, No. 1, pp. 1-32, 1990.

  36. AKSEL, M. H., Frontogenesis due to a Horizontal Deformation Field Model in a Finite Domain, Modelling, Simulation & Control B, Vol. 33, No. 4, pp. 1-27, 1990.

  37. AKSEL, M. H., PAKSOY, M. and ALBAYRAK K., A Finite Element Simulation of Viscous and Incompressible Flow About a Circular Cylinder, Modelling, Simulation & Control B, Vol. 33, No. 3, pp. 1-39, 1990.

  38. AKSEL, M. H. and KAYA, T., A Finite Element Simulation of the Axisymmetric Vortex Breakdown in a Tube, Modelling, Simulation & Control B, Vol. 33, No. 2, pp. 25-64, 1990.

  39. AKSEL, M. H. and BİLGİÇ, H. M., A Finite Element Simulation of Frontogenesis with a Horizontal Deformation Model by Using the Vorticity and Divergence, Modelling, Simulation & Control B, Vol. 32, No. 4, pp. 1-39, 1990.

  40. AKSEL, M. H. and KUZUCU, A. S., A Finite Element Simulation of Frontogenesis with a Horizontal Deformation Model by Using Primitive Equations, Modelling, Simulation & Control B, Vol. 31, No. 4, pp. 37-64, 1990.

  41. AKSEL, M. H., MACPHERSON, A. K. and HILTON, P. D., A Finite Element Study of Frontogenesis, Monthly Weather Review, Vol. 112, pp. 1053-1066, May 1984.

  42. MACPHERSON, A. K., AKSEL, M. H. and HILTON, P. D., A Study of Frontogenesis Using the Finite Element and Finite Difference Methods, Monthly Weather Review, Vol. 108, No. 8, pp. 1183-1196, August 1980.



Books | Papers | Proceedings | Thesis | Lecture Notes | Reports