REPORTS

  1. AKSEL, M. H.‚ A Three-Dimensional Study of Horizontal Shear Flows and Deformation Fields in a Semi-Bounded, Compressible Fluid on a Rotating Sphere with Applications to the Atmosphere, Institute of Thermo Fluid Engineering, Report No. TS-821, Lehigh University, Pennsylvania, U.S.A., 1982.

  2. AKSEL, M. H. and others‚ Rearrangement of Material Handling Equipment and Stock Areas in Ankara Plants of the Machinery and Chemical Industries, Report for METU-MATİMAREN Project No. 83-04-02-03-02, Department of Mechanical Engineering, Middle East Technical University, Ankara, December 1983.

  3. AKSEL, M. H., ALEMDAROĞLU, H. N., ERALP, O. C., ERDEN, A. and PLATİN, B. E., Design of the Mechanical Equipment for the Oxidation Ditch of the Waste Water Treatment Unit in the Social Facilities of Turkish Electrical Corporation, Report for METU-MATİMAREN Project No. 84-04-02-03-04, Department of Mechanical Engineering, Middle East Technical University, Ankara, May 1984.

  4. ARINÇ, F., KILKIŞ, B. and AKSEL, M. H., Feasibility Studies of an Interactive Stock Control Software for Turkish Petroleum Corporation , Project Report for METU-MATİMAREN Project No. 84-03-02-03-02, Department of Mechanical Engineering, Middle East Technical University, Ankara, May 1984.

  5. AKSEL, M. H. and others, Uniform Engine Testing Program, NATO-AGARD-PEP-WG15 Project Report, Department of Mechanical Engineering, Middle East Technical University, Ankara, March 1985.

  6. AKSEL, M. H., Determination of the Performance of Axial Compressors by Using Mathematical Simulation, Report for the Scientific and Technical Research Council of Turkey Project No. MAG-647, Department of Mechanical Engineering, Middle East Technical University, Ankara, April 1985.

  7. ERALP, O. C., PLATİN, B. E., AKSEL, M. H. and ÇALIŞKAN M., Evaluation and Identification of Mechanical Vibrations Observed in the Pumping Stations of First Iraq-Turkey Pipeline , Report for METU-MATİMAREN Project No. 86-03-02-03-04, Department of Mechanical Engineering, Middle East Technical University, Ankara, September 1986.

  8. ERALP, O. C., PLATİN B. E., ÇALIŞKAN, M. and AKSEL, M. H., An Investigation for the Reduction of Mechanical Vibrations Observed in the Pumping Stations of First Iraq-Turkish Pipeline , Report for METU-MATİMAREN Project No. 87-03-02-03-01, Department of Mechanical Engineering, Middle East Technical University, Ankara, January 1988.

  9. AKSEL, M. H., PLATİN, B. E. and GÖKLER, M. İ., Development of an Interactive Stock Control Software for Turkish Petroleum Corporation, Report for METU-MATİMAREN Project No. 85-03-02-03-04, 86-03-02-03-02 and 87-03-02-03-06, Department of Mechanical Engineering, Middle East Technical University, Ankara, July 1988.

  10. AKSEL, M. H., Simulation of an Axisymmetric Vortex Breakdown in a Cylindrical Tube, Report for the Middle East Technical University Research Fund Project No. 89-03-02-04, Department of Mechanical Engineering, Middle East Technical University, Ankara, December 1991.

  11. AKSEL, M. H., Development of an Interactive Euler Solver for Two-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Scientific and Technical Research Council of Turkey Project No. MİSAG-53, Department of Mechanical Engineering, Middle East Technical University, Ankara, August 1995.

  12. AKSEL, M. H., Design and Manufacturing of an Axial Fan, Report for the Middle East Technical University Research Fund Project No. 91-03-02-01, Department of Mechanical Engineering, Middle East Technical University, Ankara, December 1995.

  13. AKSEL, M. H. and KANTAR L., Flow and Thermal Calculations for the Modernisation of a Continuous Steel Casting Unit , Report for the Middle East Technical University Project No. 97-03-02-24, Department of Mechanical Engineering, Middle East Technical University, Ankara, August 1997.

  14. AKSEL, M. H., Development of an Interactive Euler Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Scientific and Technical Research Council of Turkey Project No. MİSAG-84, Department of Mechanical Engineering, Middle East Technical University, Ankara, June 1998.

  15. AKSEL, M. H., Development of an Interactive Euler Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Middle East Technical University Research Fund Project No. 96-03-02-03, Department of Mechanical Engineering, Middle East Technical University, Ankara, June 1998.

  16. AKSEL, M. H. and YILDIRIM, C., Three-Dimensional Grain Burnback Analysis in Solid Propellant Rocket Motors, Report for the Scientific and Technical Research Council of Turkey, Defence Research and Development Institute, Project No. DA-915, Department of Mechanical Engineering, Middle East Technical University, Ankara, October 1998.

  17. AKSEL, M. H., Development of an Interactive Euler Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Middle East Technical University Research Fund Project No. 98-03-02-03, Department of Mechanical Engineering, Middle East Technical University, Ankara, November 1999.

  18. AKSEL, M. H., Development of an Interactive Navier-Stokes Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Middle East Technical University Research Fund Project No. 99-03-02-01, Department of Mechanical Engineering, Middle East Technical University, Ankara, May 2001.

  19. AKSEL, M. H., Development of an Interactive Navier-Stokes Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Scientific and Technical Research Council of Turkey Project No. MİSAG-132, Department of Mechanical Engineering, Middle East Technical University, Ankara, August 2001.

  20. AKSEL, M. H., Development of an Interactive Navier-Stokes Solver for Three-Dimensional Compressible Flows by Using a C++ Compiler, Report for the Middle East Technical University Research Fund Project No. 2000-03-02-04, Department of Mechanical Engineering, Middle East Technical University, Ankara, November 2001.

  21. AKSEL, M. H., Design of a Solid Propellant Rocket Engine,Report for the State Planning Organization Project No. DPT2000K120380, Department of Mechanical Engineering, Middle East Technical University, Ankara, October 2004.

  22. SHAFER, M., KARASÖZEN, B., AKSEL, M. H. and KARAKAŞ, G., Optimization of Stirrer Configurations by Numerical Simulation, Report for the Volkswagen Foundation Research Fund Project No. 1/77 414, July 2005.

  23. AKSEL, M. H., Development of a Navier-Stokes Code for Incompressible Flows, Report for the Middle East Technical University Research Project No. 2005-07-02-00-86, Department of Mechanical Engineering, Middle East Technical University, Ankara, December 2005.

  24. AKSEL, M. H., Comparison of Turbulence Models for an Incompressible Navier-Stokes Code, Report for the Middle East Technical University Research Fund Project No. 2005-07-02-00-87, Department of Mechanical Engineering, Middle East Technical University, Ankara, November 2005.

  25. AKSEL, M. H., Development of an Interactive Navier-Stokes Solver by Using Parallel Computations and a C++ Compiler for Industrial Applications, Report for the State Planning Organization Project No. DPT2002K120540-09, Department of Mechanical Engineering, METU, Ankara, November 2006.

  26. AKSEL, M. H., Problems Related to the Calculation of the Correction Coefficients during the Evaluation of Real Natural Gas Consumption, Report for the Middle East Technical University Research Project No. 2006-03-92-1-00-10, Department of Mechanical Engineering, METU, Ankara, December 2006.

  27. AKSEL, M. H. and KESİM, H., Improvement of Heating Capacity of a Panel Radiator, Report for the Middle East Technical University Research Project No. BİLTİR-T-2007-0804-C-017, Department of Mechanical Engineering, METU, Ankara, May 2008.

  28. AKSEL, M. H., COŞKUN, K., TINAZTEPE, T. and TOKER, K. A., Grain Burnback and Flow Simulation in Solid Propellant Rocket Engines, Report for the Scientific and Technical Research Council of Turkey Project No. MAG-104M429, Department of Mechanical Engineering, METU, Ankara, August 2008.

  29. AKSEL, M. H., SERT, C.. and ÇAKMAK; M, Development of a Three-dimensional Euler Solver for Cartesian Grids, Report for the Scientific and Technical Research Council of Turkey Project No. MAG-106M471, Department of Mechanical Engineering, METU, Ankara, August 2009.

  30. AKSEL, M. H., KARASÖZEN, B., SİYAHHAN, B. and ÇAKMAK, M., Development of a Three-dimensional Euler Solver for Cartesian Grids, Report for the Middle East Technical University Research Fund Project No. BAP-2007-07-05-03, Department of Mechanical Engineering, METU, Ankara, December 2009.

  31. AKSEL, M. H., SERT, C., SİYAHHAN, B. and ÇAKMAK, M., Development of a Three-dimensional Euler Solver for Cartesian Grids, Report for the Middle East Technical University Research Fund Project No. BAP-2007-03-02-01, Department of Mechanical Engineering, METU, Ankara, December 2009.

  32. TURAN, R., AKSEL, M. H., KILKIŞ B., DEMİRCİOĞLU, O. and ÖNGÜT, A. E., Automotive Solar Cooling: Research and Development and Prototype Manufacturing for Electronic-Thermal-Mechanical-Photovoltaic Systems, Report for the Middle East Technical University Research Project No. BİLTİR-T-2008-0804-C-20, Department of Mechanical Engineering, METU, Ankara, March 2008.

  33. AKSEL, M. H. and DANIŞ, F., Development of a Barrel Internal Ballistic Software, Report for the Ministry of Industry and Trade SANTEZ Project No. 00479.STZ.2009-2, Department of Mechanical Engineering, METU, Ankara, November 2012.

  34. AKSEL, M. H., ÇETİNKAYA, T. and ŞAHİN, M. S., Development of a Two-dimensional Laminar Navier Stokes Solver for Cartesian Grids, Report for the Scientific and Technical Research Council of Turkey Project No. MAG-109M510, Department of Mechanical Engineering, METU, Ankara, May 2012.

  35. AKSEL, M. H. and KÖRPE, S., Development of an External Balistic Simulation Software, Report for the Ministry of Industry and Trade SANTEZ Project No. 00548.STZ.2010-1, Department of Mechanical Engineering, METU, Ankara, November 2012.

  36. AKSEL, M. H., ÇETİNKAYA, T. and ŞAHİN, M. S., Development of a Two-dimensional Navier Stokes Solver for Cartesian Grids, Report for the Middle East Technical University Research Fund Project No. BAP-03-02-2010-01, Department of Mechanical Engineering, METU, Ankara, December 2012.

  37. BARAN, Ö. U., SAATLOO, M. M. and AKSEL, M. H. Development of a Three-dimensional Stress-Strain and Thermal Analysis Software Based on Cartesian Grids, Report for the Middle East Technical University Research Project No. 13-02-02-2-00-31, Department of Mechanical Engineering, METU, Ankara, June 2014.

  38. TURAN, R., AKSEL, M. H. and KARAKUŞ, A., Development of Heat Exchanger Systems for Heavy Duty Vehicles, Report for the Middle East Technical University Research Project No. BİLTİR-T-2013-0804-C-003, Department of Mechanical Engineering, METU, Ankara, September 2014.



Books | Papers | Proceedings | Thesis | Lecture Notes | Reports