! Example relizable values file.
! Files stored under the format below may be used in FILPRO
! when it needs to check out elements are realizable or not.
! Comment out lines with "!"
!
! Format for values:
!    VALUEPARAM=  ValueMinimum  ValueMaximum  ValueDefault
!
! ValueMinimum and ValueMaximum are user defined values. They are used to
! check out whether an element parameter value is realizable or not.
! If   ValueMinimum  <=  ElementValue  <=  ValueMaximum  then REALIZABLE.
!
! ValueDefault is used when an element to be inserted into circuit.
!
! VALUEPARAM= contains parameter name and its unit. IT MUST NOT BE CHANGED.
!
! List of valid VALUEPARAM= is given below:
! VALUEPARAM=     Description
! -----------     -----------
! Cap.pF=         capacitor, in picoFarads.
! Ind.nH=         inductor, in nanoHenries.
! Res.Ohm=        resistor, in Ohms.
! Zo.Ohm=         distributed element characteristic impedance, in Ohms.
! Lng.mm=         distributed element length, in millimeters.
! Er=             relative permittivity, unitless.
! InvK=           impedance inverter constant
! TrnsfN=         transformer turns ratio n  (1:n)
! Zc.Ohm=         coupled line common-mode impedance, in Ohms.
! Zp.Ohm=         coupled line pi-mode impedance, in Ohms.
! Rc=             coupled line common-mode impedance ratio, unitless.
! Rp=             coupled line pi-mode impedance ratio, unitless.
!                 for coupled lines:   Zc2 = -Rc*Rp*Zc1,  Zp2 = -Rc*Rp*Zp1
!
! Below is a valid data example:
Cap.pF=    0.001     100000000000    1
Ind.nH=    0.000001  100000000       1
Res.Ohm=   0.001     10000000        50
Zo.Ohm=    0.001     10000           50
Lng.mm=    0.001     1000            10
Er=        1         1000000         1
InvK=      0.001     10000           50
TrnsfN=    0.01      100             1
Zc.Ohm=    0.001     10000           100
Zp.Ohm=    0.001     10000           25
Rc=        -1000     1000            1
Rp=        -1000     1000           -1



