SUPERVISED RESEARCH

Ph. D. Thesis

1. Necmettin Anıl KÜNDEŞ, Development of Flowpath Design Tool for Gas Turbine Engines, Co-Supervisor (Principal Supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2025.


2. Mert ERK, Sub-Idle Performance Modeling of a Turboshaft Engine, Co-Supervisor (Co-Supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2025.


3. Mustafa BİLGİÇ, Development of Thermofluidic Design Tool for Organic Rankine Cycle Axial and Radial Inflow Turbines, Co-Supervisor (Principal Supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2023.


4. Mustafa AKDEMİR, Development of a Flow Solver for the Compressible Large Eddy Simulations, Sole Supervisor (Co-Supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2023.


5. Mahtab Mansoor SAATLOO, GPU Accelerated High-Order Discontinuous Galerkin Level Set Methods for Incompressible Multiphase Flows, Principal Supervisor (Co-Supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2023.


6. Deniz KAYA EYİCE, Investigation of Droplet Flame Interactions through Experimental and Numerical Approaches, Co-supervisor (Principal Supervisor: Ahmet YOZGATLIGİL), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


7. Aras SAYGIN, Development of an Upwind Linearized Harmonic Flow Solver for Turbomachinery Flows, Co-Supervisor (Co-Supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2023.


8. Ali KARAKUŞ, GPU Accelerated High-Order Discontinuous Galerkin Level Set Methods for Incompressible Multiphase Flows, Principal Supervisor (Co-Supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


9. Emre KARA, Development of a Navier-Stokes Solver for Compressible Flows on Cartesian Grids with Aerodynamics Applications, Co-Supervisor (Supervisor: Ali İhsan KUTLAR), Mechanical Engineering Department, Gaziantep University, Gaziantep, Turkey, May 2015.


10. Emel MAHMUTYAZICIOĞLU, Development of an Octree Based Grid Coarsening and Multigrid Flow Solutions, Principal Supervisor (Co-supervisor: İsmail Hakkı TUNCER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2010.


11. Cengizhan YILDIRIM, Analysis of Grain Burnback and Internal Flow in Solid Propellant Rocket Motors in 3-Dimensions, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2007.


12. Oktay Lütfi GÖNÇ, Computation of External Flow about Rotating Bodies, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2005.


13. Kemal Atılgan TOKER, Three-Dimensional Retarding Walls and Flow In Their Vicinity, Ph. D. Thesis, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2004.

M. Sc. Thesis

1. Utku İnanç PEHLİVAN, Numerical Investigation and Experimental Validation of Primary Flow Nozzle of an Ejector System, Principal Supervisor (Co-supervisor: Ali Ruhşen ÇETE), Aeronautical Engineering Department, University of Turkish Aeronautical Association, Ankara, Turkey, June 2025.


2. Beril EMERCE, Numerical Investigation and Experimental Validation of Primary Flow Nozzle of an Ejector System, Co-supervisor (Principal Supervisor: Ali KARAKUŞ), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2023.


3. Mert ÇİL, Numerical Design, Analysis and Optimization of Nozzles in a Washing Machine, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, April 2023.


4. Sercan ÖZTÜRK, Design and Performance Analysis of a Counter Rotating Propeller, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2022.


5. Umut İLHAN, Implementation and Assessment of Hellsten Explicit Algebraic Reynolds Stress K-Omega Model, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2022.


6. Ata ONUR, Development of 2D Turbulent Navier-Stokes Solver for Cartesian Grids, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2022.


7. Mesut KOÇ, Modelling of Interaction of Shock Waves with Analytical Methods, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, February 2022.


8. Sevda ÖZER, A Subsonic (Turboprop) Engine Inlet Design and Optimization, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2022.


9. Halit Eldem UZUN, Development Development of an Automatic Analysis Tool for Helicopter Rotors, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2021.


10. Tolga GÜMÜŞEL, Numerical Investigation of Cavitating Flow in Variable Area Venturi on the Basis of Experimental Data, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2020.


11. Merve ÖZKAN, Development of Cartesian Based Mesh Generator with Body Fitted Boundary Layers, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2019.


12. Berksu ERKAL, Design of a Pintle Injector, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2019.


13. Aysu ÖZDEN, Performance Characteristics of a Cold Gas Thruster with Real Gas Effects, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2019.


14. Efe Can DAĞLI, Numerical Simulation of Lateral Jets in Supersonic Cross Flow of Misisles Using CFD, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2019.


15. Mahir İlter BİLGE, CFD Simulation of Train Fire in the İstanbul Metro Tunnel, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2018.


16. Defne KIRAN, CFD Simulation of the Developing Boundary Layer in an Atmospheric Wind Tunnel, Principal Supervisor (Co-supervisor: Ali Ruhşen ÇETE), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2018.


17. Bulut TEKGÜL, On the Applicability of Progress Variable Approach for Large Eddy Simulation of Premixed Flames, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, October 2017.


18. Necmettin Anıl KÜNDEŞ, Development of an Automatic Design and Analysis Tool for Axial Compressors, Principal Supervisor (Co-supervisor: Özgür Uğraş BARAN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, August 2017.


19. Arslan Ömür ÖZCAN, Evaluation of the Efficiency Increment Potential for Francis Turbines Using CFD Analysis, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2016.


20. İbrahim YAMAN, Numerical Analysis of the Effects of Atmospheric Parameters on Space Launch Center Safety, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2016.


21. Mehmet YALILI, Application of Numerical Shape Optimization to the Runner Blades of a Francis Turbine, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


22. Emrah GÜLLÜ, Meanline Performance Analysis of Radial Compressors, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


23. Mert ERK, Development of a Cycle Design Software for Turboshaft Engines, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


24. Mustafa BİLGİÇ, Development of a Blade to Blade Solver for Axial Turbomachinery, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2015.


25. Murat BAĞÇE, Design and Performance Evaluation of the Propeller of an UAV, Principal Supervisor, (Co-supervisor: Ali Ruhşen ÇETE) Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, Februaty 2015.


26. Ayşegül ÇİLLİ TARÇIN, Experimental and Computational Evaluation of Transient Behaviour of a Typical Satellite Monopropellant Propulsion System, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2014.


27. Başar ESİRGEN, Numerical and Experimental Investigation of Direct Connected Ramjet Test Facility, Principal Supervisor (Co-supervisor: Kemal Atılgan TOKER, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2014.


28. Kadir Gökhan GÜLER, Computational Modelling of Fin-and-Tube Type Vehicle Radiators Based on Porous Medium Approach, Principal Supervisor (Co-supervisor: Barbaros ÇETİN), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, May 2014.


29. Faik DANIŞ, Development of an Interior Ballistic Simulation Software, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, February 2014.


30. Eren DEMİRCAN, Design and analysis of a Vertical Axis Water Turbine for River Applications Using Computational Fluid Dynamics, Principal Supervisor (Co-supervisor: Mehmet Metin YAVUZ), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2014.


31. Serkan Berkay KÖRPE, Development of an External Ballistic Simulation Software, Principal Supervisor (Co-supervisor: Mehmet Ali AK), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2013.


32. Fatih ERCİS, Design and Construction of an Unmanned Underwater Vehicle, Co-supervisor (Supervisor: Sıtkı Kemal İDER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 2013.


33. Osman YÜCEL, Ballistic Design Optimization of Three-Dimensional Grains Using Genetic Algorithms, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2012.


34. Ali KARAKOÇ, Multi-disiplinary Design and Optimization of Air to Surface Missiles with respect to Flight Performance and Radar Cross-Section, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2011.


35. Ahmet Muaz ATEŞ, Experimental Comparison of Fluid and Thermal Characteristics of Micro Channel and Metal Foam Heat Sinks, Principal Supervisor (Co-supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2011.


36. Ela ANKARALI, CFD Analysis of an Underwater Target Emulator and Jammer, Principal Supervisor (Co-supervisor: Sıtkı Kemal İDER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 2011.


37. Mehmet Serkan ŞAHİN, Development of a Two-Dimensional Navier-Stokes Solver for Laminar Flows Using Cartesian Grids, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 2011.


38. Necati KARAİSMAİLOĞLU, Mechanical Design of an Underwater Target Emulator and Jammer, Co-Supervisor (Principal Supervisor: Sıtkı Kemal İDER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2011.


39. Alp Emre ÖNGÜT, Thermo-mechanical and Photovoltaic System Development for Automotive Solar Cooling, Principal Supervisor (Co-supervisor: Birol KILKIŞ), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2010.


40. Mustafa AKDEMİR, Development of an Axisymmetric, Turbulent and Unstructured Navier-Stokes Solver for Internal Flows in Solid Propellant Rocket Motors, Principal Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 2010.


41. Mehtap ÇAKMAK, Development of a Multigrid Accelerated Euler Solver on Adaptively Refined Two- and Three-Dimensional Cartesian Grids, Principal Supervisor (Co-supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2009.


42. Necmettin CEVHERİ, Computer Aided Engineering of an Unmanned Underwater Vehicle, Principal Supervisor (Co-supervisor: Sıtkı Kemal İDER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, July 2009.


43. Bercan SİYAHHAN, A Two-dimensional Euler Solver on Adaptive Cartesian Grids, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, May 2008.


44. Emrah ALPSAN, Experimental Investigation and Numerical Analysis of Microchannel Heatsinks for Phased Array Radar Cooling Applications, Principal Supervisor (Co-supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, May 2008.


45. Korhan COŞKUN, Three Dimensional Laminar Compressible Navier-Stokes Solver for Internal Rocket Flow Applications, Principal Supervisor (Co-supervisor: H. Tuğrul TINAZTEPE), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, Decemner 2007.


46. Elvan ERASLAN, Implementation of Different Flux Evaluation Schemes into a Two-dimensional Navier-Stokes Solver, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2006.


47. Ayhan AKIN, Development of a Laminar Navier-Stokes Solver for Incompressible Flow Using Structured Grids, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, April 2006.


48. Umut Can DİNÇGEZ, Three-dimensional Hyperbolic Grid Generation, Principal Supervisor (Co-supervisor: Ali Ruhşen ÇETE), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, April 2006.


49. Murat BULGÖK, A Quadtree-Based Adaptively-Defined Cartesian-Grid Algorithm for Solution of the Euler Equations, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, October 2005.


50. Tahsin Çağrı ŞİŞMAN, Parallel Processing of Three-dimensional Navier-Stokes Equations for Compressible Flows, Principal Supervisor (Co-supervisor: Cüneyt SERT), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2005.


51. Enver Doruk ÖZDEMİR, Implementation of Rotation into a Two-dimensional Euler Solver, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2005.


52. Emre GÜRDAMAR, Adaptation of a Turbulence Model to a Navier-Stokes Solver, Principal Supervisor (Co-supervisor: Ali Ruhşen ÇETE), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2005.


53. Orhan AYBAY, Implementation of the Spalart Allmaras Turbulence Model to a Two-dimensional Unstructured Navier-Stokes Solver, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2004.


54. Erinç ERDOĞAN, Development of a Navier-Stokes Solver for Multi-Block Applications, Principal Supervisor (Co-supervisor: H. Tuğrul TINAZTEPE), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2004.


55. Mustafa Nail MUŞTA, Implementation of Turbulence Models to a Navier-Stokes Solver, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2004.


56. Balkan Ziya GENÇ, Implementation and Comparison of Turbulence Models on a Flat Plate Problem Using a Navier-Stokes Solver, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2003.


57. M. Yalım SARP, Development of a Three-dimensional Object-oriented Navier-Stokes Solver by Using Total Variation Diminishing (TVD) Method, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 2002.


58. Özgür EROL, Development of an Euler Solver for Compressible Fluids Using Adaptive Grids, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 2002.


59. Bogaçhan ALPAN, Simulation of Three-dimensional Inviscid Flow Inside Rocket Engine Nozzles, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2001.


60. Umut ÖZDEMİR, Development of a Two-dimensional Upwind Euler Solver Using Total Variation Diminishing (TVD) Method, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2001.


61. İsmail Hakkı SEZAL, Development of a Two-dimensional Euler Solver for Unstructured Grids, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2001.


62. Gökhan UÇAR, Development of a Three-dimensional Navier-Stokes Solver for Laminar and Compressible Flow By Using Finite Volume Method, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 2001.


63. Michel El KHOURY, Development of a Three-dimensional Object Oriented Navier-Stokes Solver Using Two-Equation Turbulence Models, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 2001.


64. Mehmet Umut HALİLOĞLU, Development of a Three-dimensional Object Oriented Navier-Stokes Solver Using C++ Programming Language, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 2000.


65. Kazım DOĞRU, Parallel Processing of Two-dimensional Euler Equations for Compressible Flows, Principal Supervisor (Co-supervisor: ?smail Hakk? TUNCER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, May 2000.


66. Halil IŞIK, Development of a Two-dimensional Navier-Stokes Solver for Laminar Compressible Flows by Using Finite Volume Method, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, December 1999.


67. Levent KANTAR, Development of an Axisymmetric Euler Solver Using Finite Volume Method for Internal and External Flows, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1999.


68. Cengizhan YILDIRIM, Grain Burnback Analysis in the Design of a Solid Propellant Rocket Engine, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 1998.


69. Hakan FİLİZ, Development of a Computer-Aided Fluid Mechanics Software Package, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 1998.


70. Cüneyt SERT, Development of a Three-dimensional Object Oriented Euler Solver Using C++ Programming Language, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1998.


71. Amer EL-ALİ, Development of a Two-dimensional Euler Solver Using the Finite Difference Method for Internal Flows, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 1996.


72. Hüseyin Serdar LÜLE, Development of a Two-Dimensional Euler Solver Using the Finite Element Method for Internal Flows, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 1995.


73. Fatoş Esen KINOĞLU, Three-dimensional Euler Solver with Finite Volume Method for Internal Flows, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 1995.


74. Ercan ERTÜRK, A Numerical Experimentation of the Boundary Conditions for a Two-dimensional Multigrid Euler Solver Using Finite Volume Method for Internal Flows, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1995.


75. Özlem MUTAF YARDIMCI, Development of a Two-Dimensional Euler Solver Using Finite Volume Method for Internal Flows, Primary Supervisor (Co-supervisor: M. Cevdet ÇELENLİGİL), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1994.


76. Reza PENAHİ, Gas Particle and Gas-Only Flow in the Nozzles of Solid Propellant Rocket Engines, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 1994.


77. Özgür ÇEÇEN, Computer Aided Design and Manufacturing of an Axial Fan,Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, November 1993.


78. Rıdvan UÇAR, Solid Propellant Grain Design and Internal Ballistics, Principal Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, September 1993.


79. Mohamed MOHAMED, Finite Element Simulation of Viscous Incompressible Laminar Flow Over Two-Dimensional Bodies, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, November 1991.


80. Çağatay BAŞDOĞAN, Evaluation of Duct Design Methods and Computer Aided Two-dimensional Air Duct System Design, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1991.


81. Armağan ALTINIŞIK, A Finite Element Simulation of Navier Stokes Equations for the Incompressible Flow Through the Bundles of Cylinders, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1991.


82. Soner KUZUCU, A Finite Element Simulation of Frontogenesis in the Atmosphere by Using the Primitive Equations with a Horizontal Deformation Model, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, February 1989.


83. Metin PAKSOY, A Finite Element Solution of the Navier-Stokes Equations for the Symmetric, Viscous, Incompressible Flow Around a Circular Cylinder, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, January 1989.


84. H. Münci BİLGİÇ, A Finite Element Simulation of the Frontogenesis in the Atmosphere with the Vorticity Divergence Formulation by Using a Horizontal Deformation Model Model, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, October 1988.


85. Turhan TURHANGİL, A Finite Element Simulation of Frontogenesis in the Atmosphere by Using the Semi-Implicit Time Integration Scheme with a Horizontal Deformation Field Model, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, October 1988.


86. Mofid MAHDİ, Development of a Finite Element Computer Code for the Solution of Some Fluid Mechanics and Heat Transfer Problems, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, June 1988.


87. Bilgin ÇELEN, Experimental Investigation on the Mixing Region of Coaxial Jets, Co-supervisor (Principal Supervisor: Osman Cahit ERALP), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, Decemmber 1987.


88. Tarık KAYA, A Finite Element Simulation of the Navier-Stokes Equations for the Axisymmetric Vortex Breakdown in a Tube, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, February 1987.


89. Aytaç ORHAN, An Experimental Investigation and Numerical Visualization of Fluid Flow in Annular Ducts at the Inlet of an Axial Compressor, Sole Supervisor, Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, August 1986.


90. Yücel ÖZDEMİR, Computer Simulation of Radial Pumps, Co-supervisor (Principal Supervisor: Ahmet Şevket ÜÇER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 1986.


91. Oğuz OKTAY, Secondary Flow and Spanwise Mixing in Axial Flow Compressors, Principal Supervisor (Co-supervisor: Ahmet Şevket ÜÇER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 1986.


92. M. Hakan ARITÜRK, Investigations on the Axial Flow Compressor Loss and Deviation Correlations Applied to Through Flow Computer Program, Principal Supervisor (Co-supervisor: Ahmet Şevket ÜÇER), Mechanical Engineering Department, Middle East Technical University, Ankara, Turkey, March 1986.

B. Sc. Thesis

1. Jiaqi JI, Automatic Double Layers Parking Lot, Sole Supervisor, School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, September 2021.


2. Jiawei WANG, Design and Analysis of a Movable Automatic Disinfection Robot, Sole Supervisor, School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, September 2021.


3. Zhichao JIA, Research on Lightweight Robot Arm, Sole Supervisor, School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, September 2020.


4. Hao LI, Application of Centrifugal Pump, Common Problems and Their Solutions, and Calculation of Impeller Structure, Sole Supervisor, School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, September 2020.


5. Zeyang WANG, Analysis and Design of Soccer Robot Decision System, Sole Supervisor, School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, September 2020.


6. Yilin ZHOU, Design and Construction of a Low-cost Wind Tunnel, Co-supervisor (principal Supervisor: Enver Doruk ÖZDEMİR), School of Engineering and Architecture, SRH University Heidelberg, Heidelberg, Germany, January 2020.