|
|||||
|
|||||
Prof. Dr. Haluk Darendeliler |
|||||
|
|||||
|
|||||
Department
of Mechanical Engineering |
|||||
Middle
East Technical University |
|||||
06800
Ankara, Turkey |
|||||
|
|||||
|
|||||
Phone: |
90
312 210 52 79 |
||||
Fax: |
90
312 210 25 36 |
||||
E-mail: |
hdarende@metu.edu.tr |
||||
|
|||||
|
|||||
Current Research
Topics |
|||||
|
|||||
• |
Plasticity
and Metal Forming |
||||
• |
Solid
Mechanics |
||||
• |
Computational
Mechanics |
||||
|
|||||
|
|||||
Education |
|||||
|
|||||
B.S. |
Mechanical
Engineering, METU, 1981 |
||||
M.S. |
Mechanical
Engineering, METU, 1983 |
||||
Ph.D. |
Mechanical
Engineering, METU, 1991 |
||||
|
|||||
|
|||||
Academic |
|||||
|
|||||
1982 |
Student
Assistant, Mechanical Engineering Department, METU |
||||
1982
- 1984 |
Research
Assistant, Mechanical Engineering Department, METU |
||||
1986
- 1992 |
Instructor,
Mechanical Engineering Department, METU |
||||
1992
- 1993 |
Postdoctoral
Scholar, Engineering Research Center for Net Shape Manufacturing, Ohio State
University, Columbus, Ohio, USA |
||||
1993
- 1996 |
Assistant
Professor, Mechanical Engineering Department, METU |
||||
1996
- 2002 |
Associate
Professor, Mechanical Engineering Department, METU |
||||
2002
- |
Professor,
Mechanical Engineering Department, METU |
||||
|
|||||
|
|||||
Administrative |
|||||
|
|||||
2000
- 2008 |
Acting
Secretary General, METU |
||||
2000
- 2008 |
Member
of Executive Board, Northern Cyprus Campus, METU |
||||
2002
- 2004 |
Member
of Executive Board, METU Development Foundation Education Services
Corporation, Ankara |
||||
2004
- 2006 |
Member
of Executive Board, TÜBİTAK-ODAGEM, Ankara |
||||
2006
- 2023 |
Head
of Metal Forming Unit, METU-BİLTİR Center, METU |
||||
|
|||||
|
|||||
Editor |
|||||
|
|||||
1993
- 1999 |
Journal
of Turkish Mechanical Design and Production |
||||
|
|||||
|
|||||
Committees |
|||||
|
|||||
• |
Mechanical
Engineering Department, METU |
||||
|
|||||
|
1987
- 1996 |
Member
of Summer Practice Committee |
|||
|
1995
- 1996 |
Member
of M.S. Education Committee |
|||
|
1996
- 1999 |
Member
of Department Publicity Committee |
|||
|
2004
- 2006 |
Member
of B. S. Education Committee |
|||
|
2006
- 2010 |
Member
of Ph. D. Education Committee |
|||
|
2010
- 2012 |
Member
of Graduate Education Committee |
|||
|
2010
- 2013 |
Member
of Laboratory Committee |
|||
|
2012
- 2013 |
Member
of B. S. Education Committee |
|||
|
2013
- 2014 |
Member
of Graduate Education Committee |
|||
|
2014
- 2016 |
Member
of Academic Planning Committee |
|||
|
2014
- |
Member
of Laboratory Committee |
|||
|
|||||
• |
METU |
||||
|
|||||
|
2000
- 2008 |
Member
of Heating and Electric Infrastructure Committee |
|||
|
2000
- 2008 |
Member
of Telecommunication Infrastructure Committee |
|||
|
2000
- 2008 |
Member
of Lake Eymir and Environment Committee |
|||
|
2000
- 2008 |
Member
Traffic Committee |
|||
|
2000
- 2008 |
Member
of Cellular Phone Base Stations Committee |
|||
|
|||||
|
|||||
Other |
|||||
|
|||||
|
1989
- 1990 |
Member
of Executive Board, Turkish Mechanical Design and Production Society |
|||
|
2003
- 2012 |
Member
of Advisory Committee, Turkish Patent Institute, Ankara |
|||
|
2004
- 2006 |
Member
of Executive Board, TÜBİTAK-ODAGEM, Ankara |
|||
|
2006
- 2008 |
Member
of City Council, Ankara |
|||
|
|||||
|
|||||
Courses Offered |
|||||
|
|||||
• |
ME
205 Statics |
||||
• |
ME
206 Strength of Materials |
||||
• |
ME
208 Dynamics |
||||
• |
ME
210 Applied Mathematics for Mechanical Engineers |
||||
• |
ME
212 Principles of Production Engineering |
||||
• |
ME
307 Machine Elements I |
||||
• |
ME
308 Machine Elements II |
||||
• |
ME
407 Machine Design |
||||
• |
ME
408 Hoisting and Conveying Machinery |
||||
• |
ME
434 Advanced Strength of Materials |
||||
• |
ME
541 Plasticity and Computer Aided Metal Forming |
||||
• |
ME
586 Variational Principles in Elasticity |
||||
|
|||||
|
|||||
Publications |
|||||
|
|||||
• |
T. Güzelderen, H. Darendeliler, 2024, Effects of triaxiality and Lode
parameter on deep drawing process, Materials Research Proceedings, 41,
1326-1333, DOI: 10.21741/9781644903131-147. |
||||
• |
S. R. Dal, H. Darendeliler,
2022, Analysis of side-wall wrinkling in deep drawing processes, Key
Engineering Materials, 926, 732-743, DOI:10.4028/p-i5q886. |
||||
• |
R. H. Demirkol, H. Darendeliler, 2022, Effects of temperature on deep drawing of
an aluminum alloy for different yield criteria and hardening models, Key
Engineering Materials, 926, 784-801, DOI:10.4028/p-s91nhk. |
||||
• |
S. Gökşen, H. Darendeliler, 2020, The
effect of strain rate and temperature on forming limit diagram for DKP-6112
and AZ31 materials, Procedia
Manufacturing, 47, 1241–1244, DOI:10.1016/j.promfg.2020.04.194. |
||||
• |
S.R. Dal,
H. Darendeliler, 2019, Baskı
plakası kuvvetinin derin çekme işlemi
üzerindeki etkilerinin farklı pekleşme kuralları ve akma kriterleri ile incelenmesi, 21. Ulusal Mekanik Kongresi Bildiriler Kitabı, 441-449. |
||||
• |
S.A. Dizaji, H. Darendeliler, B. Kaftanoğlu, 2018, A study on the constitutive equation
effects in the fracture initiation of AA5450 sheets, Proceedings of the 7th
International Conference on Fracture Fatigue and Wear, FFW 2018, Lecture Notes in Mechanical Engineering,
78-83, 2019, DOI:10.1007/978-981-13-0411-8_8. |
||||
• |
S. Abbasnejad
Dizaji, H. Darendeliler,
B. Kaftanoğlu, 2018, Prediction of forming limit
curve at fracture for sheet metal using new ductile fracture criterion, European Journal of Mechanics – A/Solids,
69, 255-265, DOI:10.1016/j.euromechsol.2018.01.003. |
||||
• |
Ö.
Namdar, H. Darendeliler,
2017, Buckling, postbuckling
and progressive failure analyses of composite laminated plates under
compressive loading, Composites Part B:
Engineering, 120, 143-151, DOI:10.1016/j.compositesb.2017.03.066. |
||||
• |
F.
Çoğun, H. Darendeliler,
2017, Comparison of different yield criteria in various deep drawn cups, International Journal of Material Forming,
10(1), 85-98, DOI:10.1007/s12289-015-1258-3. |
||||
• |
M.
İ. Gökler, U. Ç. Doğan,
H. Darendeliler, 2016, Effects of forming history
on crash simulation of a vehicle, NUMISHEET 2016: 10th International
Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming
Processes, Journal of Physics:
Conference Series, 734, 032094, DOI:10.1088/1742-6596/734/3/032094. |
||||
• |
S.
A. Dizaji, H. Darendeliler,
B. Kaftanoğlu, 2016, On the fracture prediction of
304L stainless steel sheets utilizing different hardening models, NUMISHEET
2016: 10th International Conference and Workshop on Numerical Simulation of
3D Sheet Metal Forming
Processes, Journal of Physics:
Conference Series, 734, 032021, DOI:10.1088/1742-6596/734/3/032021. |
||||
• |
S.
Abbasnejad Dizaji, H. Darendeliler, B. Kaftanoğlu,
2016, Effect of hardening models on different ductile fracture criteria in
sheet metal forming, International
Journal of Material Forming, 9(3), 261-267, DOI:
10.1007/s12289-014-1188-5. |
||||
• |
Ö Şenol, V. Esat, H. Darendeliler, 2014, Springback
analysis in air bending process through experiment based artificial neural
networks, 11th International
Conference on Technology of Plasticity, Procedia Engineering, 81, 999-1004, DOI:10.1016/j.proeng.2014.10.131. |
||||
• |
S.
Gürgen, M. İ. Gökler, H. Darendeliler, Ç. C. Çelikkaya,
K. Erden, 2013, Analysis of Roller Hemming Process for a Vehicle Tailgate
Closure, The 11th International Conference on Numerical Methods in Industrial
Forming Processes - NUMIFORM 2013, AIP
Conf. Proc., 1532(1), 367-374, DOI:10.1063/1.4806848. |
||||
• |
S.
Demirkaya, H. Darendeliler,
M. İ. Gökler, M. Ayhaner,
2013, Analysis of Hot Forming of a Sheet Metal Component Made of Advanced
High Strength Steel, The 11th International Conference on Numerical Methods
in Industrial Forming Processes - NUMIFORM 2013, AIP Conf. Proc., 1532(1), 421-426, 2013, DOI:10.1063/1.4806855. |
||||
• |
Ö.
Şenol, V. Esat, H. Darendeliler, 2013, Springback
Analysis in Wipe Bending Process through Neural Networks, 7th International Conference and
Exhibition on Design and Production of Machines and Dies/Molds, Antalya,
Turkey, 59-63. |
||||
• |
M. Uçan, H. Darendeliler, 2013, Comparison of different constitutive models in sheet metal forming, ESAFORM 2013 International Conference on Material Forming, Key Engineering Materials, 554-557, 1203-1216, DOI:10.4028/www.scientific.net/KEM.554-557.1203. |
||||
• |
F.
Dere, H. Darendeliler, S.
K. İder, 2013, Experimental
and Finite Element Analysis of Rotary Draw Tube Bending Process, 7th
International Conference and Exhibition on Design and Production of Machines
and Dies/Molds, Antalya, Turkey, 51-58. |
||||
• |
T.
Yıldız, Y. Olcay, H. Darendeliler,
2012, Large Deformation Analysis of Laminated Composite Plates, Proceedings of the Eleventh International
Conference on Computational Structures Technology, Dubrovnik, Croatia. |
||||
• |
Sh.
A. Dizaji, F. Djavanroodi,
H. Darendeliler, 2012, Effect of Anisotropy on the
Hydroforming of Aluminum Alloy AA6061-T6 Using Newly Developed Method, 5th International Mechanical Engineering
Forum, Prague, Czech Republic. |
||||
• |
V.
Esat, H. Darendeliler, M.
İ. Gökler, 2011, Bending Tool Design for a Complex
Part Using a Finite Element Analysis Based Approach, 6th International Conference and Exhibition on Design and Production
of Machines and Dies/Molds, Ankara, Turkey, 77-82. |
||||
• |
Ö.
N. Cora, M. Akkök, H. Darendeliler,
2008, Modeling of variable friction in cold forging, Proceedings of the Institution of Mechanical Engineers, Part J,
Journal of Engineering Tribology, 222(J7), 899-908, DOI:
10.1243/13506501JET419. |
||||
• |
S.
İşbir, H. Darendeliler,
M.İ. Gökler, 2006, Finite Element Analysis of
Shearing Process, Proceedings of the
Fifth International Conference on Engineering Computational Technology,
Las Palmas, Spain. |
||||
• |
M.
Ceran, M. İ. Gökler, H. Darendeliler, 2006, Finite Element Analysis of Header
Dies for Upset Forging, Proceedings of
the Eighth International Conference on Computational Structures Technology,
Las Palmas, Spain. |
||||
• |
B.
Civelekoğlu, H. Darendeliler,
M. İ. Gökler, 2004, Analysis of Forging for C45
Carbon Steel, X20Cr13 Stainless Steel and 42CrMo4 Alloy Steel, Proceedings of 3rd International
Conference and Exhibition on Design and Production of Dies and Molds, Bursa,
Turkey. |
||||
• |
Ö.
Dogan, M. İ. Gökler, H. Darendeliler,
2002, Finite Element Analysis of Effects of Tapered Preforms on Final Product
in Cold Upsetting, Proceedings of the
Third International Conference on Engineering Computational Technology,
Prague, Czech Republic. |
||||
• |
H.
Darendeliler, M. Akkök,
C. Yücesoy, 2002, Effect of variable friction
coefficient on sheet metal drawing, Tribology
International, 35(2), 97-104. |
||||
• |
V.
Esat, H. Darendeliler, M.
İ. Gökler, 2002, Finite element analysis of springback in bending of aluminum sheets, Materials and Design, 23(2), 223-229. |
||||
• |
V.
Esat, H. Darendeliler, M.
İ. Gökler, 2001, Springback
Analysis in Various Bending Dies by Using Finite Element Method, 2nd
International Conference and Exhibition on Design and Production of Dies and
Mold Conference Proceedings, Kuşadası, Turkey. |
||||
• |
V.
Esat, H. Darendeliler, M.
İ. Gökler, 2001, Finite Element Analysis of Springback in Bending of Aluminum Sheets, Proceedings of International Conference
Advances in Production and Processing of Aluminum, Bahrain. |
||||
• |
H.
Darendeliler, S. Oral, A. Turgut, 1999, A
pseudo-layered elastic-plastic flat-shell finite element, Computer Methods in Applied Mechanics and
Engineering, 174(1-2), 211-218. |
||||
• |
M.
İ. Gökler, H. Darendeliler,
N. Elmaskaya, 1999, Analysis of tapered preforms in
cold upsetting, International Journal
of Machine Tools and Manufacture, 39(1), 1-16. |
||||
• |
H.
Darendeliler, 1998, Elastic-Plastic Large
Strain-Large Displacement Analysis of Sheet Metal Forming Processes, Advances in Computational Structural
Mechanics, Civil-Comp Press, Edinburgh, UK, 343-348. |
||||
• |
C.
Tendürüs, B. Kaftanoğlu,
H. Darendeliler, 1997, Finite Element Modeling of
Blank Optimization in the Deep-Drawing Process, International Conference and Exhibition on Design and Production of
Dies and Molds, Istanbul, Turkey. |
||||
• |
S.
Oral, H. Darendeliler, 1997, The optimum die
profile for the cylindrical bending of plates, Journal of Materials
Processing Technology, 70, 151-155. |
||||
• |
M.
A. Darendeliler, H. Darendeliler,
O. Üner, 1997, The drum spring (ds) retractor: A
constant and continuous force for canine retraction, European Journal of Orthodontics, 19(2), 115-130. |
||||
• |
H.
Darendeliler, T. Altan,
1996, Analysis of axisymmetric cup drawing in relation to friction, Journal of Materials Processing Technology,
58(2-3), 293-301. |
||||
• |
O.
Üner, N. Darendeliler, H.
Darendeliler, 1995, Analysis of the Forces on
Temporomandibular Joint (in Turkish), Proceedings
of Academic Computing in Macintosh Environment, Mediterranean University,
Antalya, Turkey. |
||||
• |
O.
Üner, N. Darendeliler, H.
Darendeliler, 1994, Analysis of the Effects of Bite
Force and Chewing Muscle Forces on Temporomandibular Joint (in Turkish), 4th International Congress of Society of
Turkish Orthodontics, Antalya, Turkey. |
||||
• |
B.
Kaftanoğlu, H. Darendeliler,
1993, Computer-Aided Modeling of Sheet-Metal Forming, 26th International Symposium on Automotive Technology and Automation,
Aachen, Germany. |
||||
• |
H.
Darendeliler, B. Kaftanoğlu,
1992, Optimum Blank Design in Deep-Drawing, Proceedings of the 2nd International Conference on Automation
Technology, Taipei, Taiwan R.O.C.. |
||||
• |
H.
Darendeliler, B. Kaftanoğlu,
1992 Modeling of Deep-Drawing Process for Rectangular Cups by Using a Finite
Element Method (in Turkish), Proceedings
of 5th National Machine Design and Production Conference, Ankara, Turkey,
151-162. |
||||
• |
S.
Darendeliler, H. Darendeliler,
T. Kınoğlu, 1992, Analysis of a central maxillary
incisor by using a three-dimensional finite element method, Journal of Oral Rehabilitation, 19,
371-383. |
||||
• |
H.
Darendeliler, B. Kaftanoğlu,
1991, Deformation analysis of deep-drawing by a finite element method, CIRP Annals, 40/1, 281-284. |
||||
• |
H.
Darendeliler, C. Çoğun,
1991, An investigation on sample size determination in electric discharge
machining (EDM), Transactions of the
Institution of Engineers, Australia, Mechanical Engineering, ME16(4),
237-244. |
||||
• |
H.
Darendeliler, C. Çogun,
A. Erden, 1986, Determination of Minimum Number of Experiments in Electric
Discharge Machining (in Turkish), Proceedings
of 2nd National Machine Design and Production Conference, Ankara, Turkey,
141-151. |
||||
|
|||||
|
|||||
Project Reports |
|||||
|
|||||
• |
H.
Darendeliler, Structural Analysis of Sterilizers
and Modular Design of Front and Side Panels, METU Technopolis No:
T-20110804-C-006, Turbotek Ltd. Şti.
- Trans Medical A.Ş., ODTÜ-BİLTİR Center, METU, Ankara, January 2012. |
||||
• |
Kamil
Özden, Haluk Darendeliler, Özgür Ufukacar, Çetin Cengiz Çelikkaya, A New
Overhead Rail System, OTEST No: 2010/002, TOFAŞ A.Ş. No: 2010/023,
ODTÜ-BİLTİR Center, METU, Ankara, December 2010 |
||||
• |
Selim
Gürgen, Haluk Darendeliler, Mustafa İlhan Gökler,
Çetin Cengiz Çelikkaya,
Kemal Erden, Development of Roller Hemming Process, OTEST A.Ş. No: 2010/001,
TOFAŞ A.Ş. No: 2010/24, ODTÜ-BİLTİR Center, METU, Ankara, September 2010. |
||||
• |
Sinem Demirkaya, Haluk Darendeliler, Mustafa İlhan Gökler,
Hot Forming of Sheet Materials, METU Technopolis No: T-2008-0804-C-016, TOFAŞ
No: 2008/196, ODTÜ-BİLTİR Center, ODTÜ, Ankara, August 2010. |
||||
• |
H.
Darendeliler, B Kaftanoğlu,
C. A Yücesoy, O. Yıldırım,
A. Turgut, , Development of the Theory and the Code
Prepared for Modeling of Sheet Metal Forming Processes for Industrial
Applications (in Turkish), Sponsored by: Government Planning Organization
(DPT), Turkey, Project Coordinator, July 1997. |
||||
• |
B.
Kaftanoğlu, H. Darendeliler,
Z. Şenalp, Computer-Aided Design of Sheet-Metal
Forming Products (in Turkish), Project No: MISAG-19, Sponsored by: Scientific
and Technical Research Council of Turkey (TÜBİTAK), Researcher, June 1995. |
||||
• |
H.
Darendeliler, S. K. Esche,
B. Kaftanoğlu, G. L Kinzel,
T Altan, Analysis and Evaluation of Axisymmetric
and Square Cup-Drawing by Using an Elastic-Plastic Finite Element Method,
Report No. ERC/NSM-S-94-11, National Science Foundation Engineering Research
Center for Net Shape Manufacturing, The Ohio State University, USA, February
1994. |
||||
• |
H.
Darendeliler, S. K. Esche,
B. kaftanoğlu, G. L. Kinzel,
T. Altan, An Elastic-Plastic Finite Element
Formulation for Three-Dimensional Large Displacement-Large Strain Analysis of
Sheet-Metal Forming Processes, Report No. ERC/NSM-S-93-56, National Science
Foundation Engineering Research Center for Net Shape Manufacturing, The Ohio
State University, USA, November, 1993. |
||||
|
|||||
|
|||||
Conference
Proceedings |
|||||
|
|||||
• |
International
Conference and Exhibition on Design and Production of Dies and Molds,
Conference Proceedings, Editors: M. Akkök, M. A. S.
Arıkan, T. Balkan, H. Darendeliler,
M. İ. Gökler, B. Kaftanoğlu,
Ankara, Turkey, 1997. |
||||
• |
Proceedings
of 7th International Machine Design and Production Conference (in Turkish),
Editors: T. Balkan, H. Darendeliler, Z. Dursunkaya, A. Erden, L. Parnas, Ankara, Turkey, 1996. |
||||
|
|||||
|
|||||
Conferences |
|||||
|
|||||
• |
Member
of Organizing Committee, 5th International Conference and Exhibition on
Design and Production of Dies and Molds, Kuşadası,
18-21 June 2009. |
||||
• |
Member
of Organizing Committee, 4th International Conference and Exhibition on
Design and Production of Dies and Molds, Çeşme,
21-23 June 2007. |
||||
• |
Member
of Organizing Committee, 55th CIRP General Assembly, Antalya, 21-27 August
2005. |
||||
• |
Member
of Organizing Committee, 3rd International Conference and Exhibition on
Design and Production of Dies and Molds and 7th International Symposium on
Advances in Abrasive Technology, Bursa, 17-19 June 2004. |
||||
• |
Member
of Organizing Committee, 2nd International Conference and Exhibition on
Design and Production of Dies and Molds, Kuşadası,
21-23 June 2001. |
||||
• |
Member
of Organizing Committee, International Conference and Exhibition on Design
and Production of Dies and Molds, İstanbul, 20-21 June 1997. |
||||
• |
Member
of Organizing Committee, 7. International Machine Design and Production
Conference, Mechanical Engineering Department, METU, Ankara, 11-13 September
1996. |
||||
|
|||||
|
|||||
Theses |
|||||
|
|||||
• |
Umut Yılmaz, Crystal Plasticity
Based Analysis of Crack Propagation at Microscale by Extended Finite
Element Method, M.S. Thesis, January
2023. |
||||
• |
Hamdi Alpay Küçüker, Thermomechanical Modeling of NiTi
Shape Memory Alloys Including Plasticity, M.S. Thesis, (Co-Supervisor: Prof. Dr. Günay Anlaş), August 2022. |
||||
• |
Utku
Kaan Cömert, Investigation of Buckling, Post-Buckling
Behavior of Variable Stiffness Composite Plates, M.S.
Thesis, August 2022. |
||||
• |
Furkan
Celen, Investigation
of Effects of Mass Distribution on Wing Flutter by Fluid-Structure
Interaction Analysis, M.S. Thesis, (Co-Supervisor: Dr. Erdal Oktay), August 2022. |
||||
• |
Tolunay Güzelderen, Investigation of
Variation of Triaxiality and Lode Angle Parameter Values in Sheet Metal
Forming Processes., M.S.
Thesis, August 2022. |
||||
• |
Cansın Bade Aydın, Deformation and Failure Analysis of Laminated
Composites by Isogeometric Elements Formulation,
M.S. Thesis, January 2020. |
||||
• |
Rasih Hakan Demirkol, Analysis of
Effects of Temperature Variation on Deep Drawing Process Using Different
Constitutive Laws, M. S. Thesis, December 2019. |
||||
• |
Saniye Rabia Dal,
Analysis of Wrinkling in Deep Drawing Process, M. S. Thesis, September 2019. |
||||
• |
Volkan
İli, Investigation of Tensile Plastic Instability and Necking for AL2024T3
Aluminum and S235JR Steel Alloys, M. S. Thesis, September 2019. |
||||
• |
İlke
Barış Canbakan, Analysis
of Deep Drawing Process by Using Hypo- and Hyperelastic
Based Plasticity Models, M. S. Thesis, August 2019. |
||||
• |
Seçkin Gökşen, The Effect of
Strain Rate and Temperature on Deep Drawing for Different Constitutive
Relations, M. S. Thesis, August 2019. |
||||
• |
Mert
İşler, Analysis of Ratcheting by
Using Different Yield Criteria and Kinematic Hardening Models for Uniaxial
and Biaxial Loading, M. S. Thesis, August 2018. |
||||
• |
Yasin
Özdoğan, Analysis of
Metal Forming by Using Isogeometric Elements, M. S. Thesis, July 2018. |
||||
• |
Shahram
Abbasnejad Dizaji, An
Investigation of Ductile Fracture Criteria for Sheet Metal Forming, Ph. D.
Thesis, (Co-Supervisor: Prof. Dr. Bilgin Kaftanoğlu) December 2014. |
||||
• |
Muhammed
Ali Çiftçi, Flexible Multibody Analysis Using
Absolute Nodal Coordinate Formulation, M. S. Thesis, (Co-Supervisor: Prof.
Dr. Kemal Sıtkı İder)
September 2014. |
||||
• |
Fatih Dere, Experimental and Finite Element Analysis of Rotary
Draw Tube Bending Process, M. S. Thesis, (Co-Supervisor: Prof. Dr. Kemal Sıtkı İder) February 2014. |
||||
• |
Burak Can Çiçek, Dynamic Analysis and Modelling of a Rocket
Launcher System, M. S. Thesis, (Co-Supervisor: Prof. Dr. Kemal Sıtkı İder) February 2014. |
||||
• |
Lüfi Ertong, Development of Internal Heating System for Hot
Forging Dies, Ph. D. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) September 2014. |
||||
• |
Özgü Şenol, Springback Analysis in
Bending Through Finite Element Method Based Artificial Neural Networks, M. S.
Thesis, (Co-Supervisor: Assist. Prof. Dr. Volkan Esat)
September 2013. |
||||
• |
Ferah Çoğun, Implementation and Comparison of Different
Constitutive Models in Deep Drawing Process, M. S. Thesis, September 2013. |
||||
• |
Aydın Tüzün, Large Deformation Analysis of Flexible Multibody
Systems, Ph. D. Thesis, (Co-Supervisor: Prof. Dr. Kemal Sıtkı
İder), September 2012. |
||||
• |
Ömer
Namdar, Buckling, Postbuckling
and Progressive Failure Analyses of Composite Laminated Plates under
Compressive Loading, M. S. Thesis, September 2012. |
||||
• |
Yasemin
Olcay, Progressive Failure Analysis of Composite Shells, M. S. Thesis,
February 2012. |
||||
• |
Meriç Uçan, Effect of Constitutive Modeling in Sheet Metal
Forming, M. S. Thesis, July 2011. |
||||
• |
Selim
Gürgen, Analysis of Roller Hemming Process for a
Vehicle Tailgate Closure, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) February 2011. |
||||
• |
Sinem Demirkaya, Analysis of Hot Forming of an Advanced High
Strength Steel Sheet Metal Component of A-Pillar in a Vehicle, M. S. Thesis,
(Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler)
September 2010. |
||||
• |
Celallettin Yumuş, Design and Analysis of Cold Forging Process on
Multi-Station Horizontal Forging Machines, M. S. Thesis, (Supervisor: Prof.
Dr. Mustafa İlhan Gökler) June 2010. |
||||
• |
Gökhan Biçer, Experimental and Numerical Analysis of Compression
on a Forging Press, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) June 2010. |
||||
• |
Mehmet
Evcim, Large Deformation Analysis of Shells under
Impulsive Loading, M. S. Thesis, February 2010. |
||||
• |
Sami
Samet Özkan, Finite
Element and Experimental Analysis of Cold Drawing for Spline Profile, M. S.
Thesis, February 2010. |
||||
• |
Mahmut Gökhan Erdoğdu, Analysis of a
High-G Camera Support Structure for Crash Test System, M. S. Thesis,
(Supervisor: Prof. Dr. Mustafa İlhan Gökler)
December 2009. |
||||
• |
Barboros Şerbetci, Finite Element Analysis and Manufacturing of
Fin Connector Rod by Hot Forging Process, M. S. Thesis, (Co-Supervisor: Prof.
Dr. Mustafa İlhan Gökler) July 2009. |
||||
• |
Uluğ Çağrı Doğan, Effect of Strain
History on Simulation of Crashworthiness of a Vehicle, M. S. Thesis,
(Supervisor: Prof. Dr. Mustafa İlhan Gökler) July
2009. |
||||
• |
Barış Eroğlu, Inner Ring Fatigue Analysis of Rolling Element
Bearings, M. S. Thesis, February 2009. |
||||
• |
Hüseyin
Öztürk, Analysis and Design for Aluminum Forging
Process, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) December 2008. |
||||
• |
Onur
Turgay Sarıkaya, Analysis
of Heat Treatment Effect on Springback in
V-Bending, M. S. Thesis, November 2008. |
||||
• |
Mehmet
Cihat Özkan,
Thermo-Mechanically Coupled Numerical and Experimental Study on 7075 Aluminum
Forging Process and Dies, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) September 2008. |
||||
• |
Tuba
Yıldız, Development of a Shell Finite Element for
Large Deformation Analysis of Laminated Composites, M. S. Thesis, September
2008. |
||||
• |
Ufuk
Penekli, Finite Element Analysis of Bending
Operation of Aluminum Profiles, M. S. Thesis, (Co-Supervisor: Prof. Dr. Suha Oral) April 2008. |
||||
• |
İlker Durukan, Effects of Induction Heating Parameters on
Forging Billet Temperature, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa
İlhan Gökler) September 2007. |
||||
• |
Sevgi Saraç, Design and Thermomechanical Analysis of Warm
Forging Process ans Die, M. S. Thesis, (Supervisor:
Prof. Dr. Mustafa İlhan Gökler) September 2007. |
||||
• |
Mehmet
Maşat, Design and Implementation of Hot Precision
Forging Die for a Spur Gear, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa
İlhan Gökler) July 2007. |
||||
• |
Ahmet
Eren, Nonlinear Deformation Analysis of Beams, M.
S. Thesis, (Co-Supervisor: Prof. Dr. Kemal Sıtkı İder) April 2006. |
||||
• |
Gülgün Aktakka, Analysis of Warm Forging Process, M. S. Thesis,
(Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler)
December 2005. |
||||
• |
Hakan Karacaovalı, Analysis of Roll-Forging, M. Sc. Thesis,
(Supervisor: Prof. Dr. Mustafa İlhan Gökler)
September 2005. |
||||
• |
Ömer
Necati Cora, Friction Analysis in Cold Forging, M.
S. Thesis, (Supervisor: Prof. Dr. Metin Akkök) December 2004. |
||||
• |
Aydın Tüzün, Analysis of Tube Upsetting, M. S. Thesis,
(Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler)
December 2004. |
||||
• |
Barış Civelekoğlu, Analysis of Forging with Three Different
Alloy Steels, M. S. Thesis, (Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler) December 2003. |
||||
• |
Barış Karagözler, Finite Element Analysis of Press Forging, M.
S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler)
January 2003. |
||||
• |
Murat
Ceran, Finite Element Analysis of Cold Upset
Forging Dies, M. S. Thesis, (Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler) November 2002. |
||||
• |
Serdar
İşbir, Finite Element Analysis of Forging Process,
M. S. Thesis, (Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler)
September 2002. |
||||
• |
Volkan
Esat, Finite Element Analysis of Springback in Bending Process, M. S. Thesis,
(Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler)
July 2002. |
||||
• |
Sertaç Gürel, Optimal Shape Design of Three
Dimensional Rigid Bodies with Constraints on Their Kinematic and
Inertial Parameters, M. S. Thesis, (Supervisor: Prof. Dr. Reşit
Soylu) December 2000. |
||||
• |
Özgür
Doğan, Analysis of Preform Shapes on Final Products
in Hot Upset Forging by Finite Element Method, M. S. Thesis, (Supervisor:
Prof. Dr. Mustafa İlhan Gökler) October 2000. |
||||
• |
Tolga Moğulkoç, Finite Element Analysis of Piercing Operation
on Forging Machines, M. S. Thesis, (Supervisor: Prof. Dr. Mustafa İlhan Gökler) February 1999. |
||||
• |
Ahmet
Turgut, An Elastoplastic Shell Finite Element, M. S. Thesis, (Co-Supervisor:
Prof. Dr. Suha Oral) April 1997. |
||||
• |
Cengiz
Tendürüs, Finite Element Modeling of
Non-Axisymmetric Deep Drawing, M. S. Thesis, (Co-Supervisor: Prof. Dr. Bilgin Kaftanoğlu) January
1997. |
||||
• |
Nazım Elmaskaya, Finite Element Analysis of Taper Preforms in
Cold Upset Forging, M. S. Thesis, (Co-Supervisor: Prof. Dr. Mustafa İlhan Gökler) January 1997. |
||||
• |
Can
Ali Yücesoy, Analysis of the Effect of Friction in
Sheet Metal Drawing”, M. S. Thesis, (Co-Supervisor: Prof. Dr. Metin Akkök) January 1997. |
||||
• |
Oktay Yıldırım, Experimental and Numerical Analysis of
Cup-Drawing, M. S. Thesis, January 1997. |
||||
• |
Mehmet
Ersan Taner, One-Dimensional Stress Variations in Longitudinal Members, M. S.
Thesis, (Supervisor: Prof. Dr. R. Orhan Yıldırım)
September 1995. |
||||