(B)  JOURNAL PAPERS  (SCI)  /  DERGÝ MAKALELERÝ

 

  

69.      O. Polat and C. Kaynak, “Use of Boron Oxide and Boric Acid to Improve Flame Retardancy of an Organophosphorus Compound in Neat and Fiber Reinforced Polyamide-6”, Journal of Vinyl and Additive Technology,  22 (3), 300-310 (September 2016), DOI: 10.1002/vnl.21445

 

68.      B. Sari and C. Kaynak, “Effects of Montmorillonite Content and Maleic Anhydride Compatibilization on the Mechanical Behavior of Polylactide Nanocomposites”, International Polymer Processing,  31 (4), 454-462 (August 2016), DOI: 10.3139/217.3226

 

67.      C. Kaynak and B. Dogu, “Effects of Accelerated Weathering in Polylactide Biocomposites Reinforced with Microcrystalline Cellulose”, International Polymer Processing,  31 (4), 410-422 (August 2016), DOI: 10.3139/217.3197

 

66.      D. Doganay, S. Coskun, C. Kaynak and H. E. Unalan, “Electrical, Mechanical and Thermal Properties of Aligned Silver Nanowire/Polylactide Nanocomposite Films”, Composites Part B,  99, 288-296 (August 2016), DOI: 10.1016/ j.compositesb.2016.06.044

 

65.    H. Kaya, C. Kaynak and J. Hacaloglu, “Thermal Degradation of Polystyrene Composites. Part II. The Effect of Nanoclay”, Journal of Analytical and Applied Pyrolysis, 120 , 194-199 (July 2016) , DOI: 10.1016/j.jaap.2016.05.005

 

64.      Y. Meyva and  C. Kaynak, “Influences of Three Different Ethylene Copolymers on the Toughness and other Properties of Polylactide”, Plastics, Rubber and Composites: Macromolecular Engineering, 45 (5) , 189-198 (July 2016), DOI: 10.1080/14658011.2016.1153821

 

63.      C. Kaynak and A.R. Erdogan “Mechanical and Thermal Properties of Polylactide/Talc Microcomposites: Before and After Accelerated Weathering”, Polymers for Advanced Technologies,  27 (6) , 812-822 (June 2016), DOI: 10.1002/pat.3721

 

62.      H. Kaya, E. Ozdemir, C. Kaynak and J. Hacaloglu,, “Effects of Nanoparticles on Thermal Degradation of Polylactide/Aluminium Diethylphosphinate Composites”, Journal of Analytical and Applied Pyrolysis,  118 , 115-122 (March 2016) , DOI: 10.1016/j.jaap.2016.01.005

 

61.      C. Kaynak and B. Sari, “Accelerated Weathering Performance of Polylactide and its Montmorillonite Nanocomposite”, Applied Clay Science,  121 , 86-94 (March 2016) , DOI: 10.1016/j.clay.2015.12.025

 

60.  B. Dogu and C. Kaynak, “Behavior of Polylactide/Microcrystalline Cellulose Biocomposites: Effects of Filler Content and Interfacial Compatibilization”, Cellulose,  23 (1) , 611-622 (February 2016) , DOI: 10.1007/s10570-015-0839-0

 

59.  C. Kaynak and I. Kaygusuz, “Consequences of Accelerated Weathering in Polylactide Nanocomposites Reinforced with Halloysite Nanotubes”, Journal of Composite Materials,  50 (3) , 365-375 (February 2016) , DOI: 10.1177/0021998315575038

 

58.  Y. Meyva and C. Kaynak, “Toughening of Polylactide by Bio-based and Petroleum-based Thermoplastic Elastomers”, International Polymer Processing,  30 (5) , 593-602 (November 2015) , DOI: 10.3139/217.3113

 

57.  C. Kaynak and S. Sankal, “Effects of Oxidative Functionalization and Aminosilanization of Carbon Nanotubes on the Mechanical and Thermal Properties of Polyamide-6 Nanocomposites”, Journal of Thermoplastic Composite Materials,  28 (9) , 1321-1333 (September 2015) , DOI: 10.1177/0892705713511480

 

56.  I. Kaygusuz and C. Kaynak, “Influences of Halloysite Nanotubes on Crystallisation Behaviour of Polylactide”, Plastics, Rubber and Composites: Macromolecular Engineering,  44 (2) , 41-49 (March 2015) , DOI: 10.1179/1743289814Y.0000000116

 

55.  C. Kaynak and O. Polat “Influences of Nanoclays on the Flame Retardancy of Fiber Filled and Unfilled Polyamide-6 with and without Aluminum Diethylphosphinate”, Journal of Fire Sciences, 33 (2) , 87-112 (March 2015) , DOI: 10.1177/0734904114555961

 

54.  C. Kaynak and Y. Meyva “Use of Maleic Anhydride Compatibilization to Improve Toughness and Other Properties of Polylactide Blended with Thermoplastic Elastomers”, Polymers for Advanced Technologies,  25 (12) , 1622-1632 (December 2014) , DOI: 10.1002/pat.3415

 

53.  A.R. Erdogan, I. Kaygusuz and C. Kaynak, “Influences of Aminosilanization of Halloysite Nanotubes on the Mechanical Properties of Polyamide-6 Nanocomposites”, Polymer Composites,   35 (7) , 1350-1361 (July 2014) , DOI: 10.1002/pc.22787

 

52.  C. Kaynak and S. Sankal, “Effects of Oxidative Functionalized and Aminosilanized Carbon Nanotubes on the Crystallization Behaviour of Polyamide-6 Nanocomposites”, Polymer Bulletin,   71 (4) , 855-873 (April 2014) , DOI: 10.1007/s00289-014-1098-1

 

51.  C. Kaynak and E. Ibibikcan, “Contribution of Nanoclays to the Flame Retardancy of Polyethylene-Based Cable Insulation Materials with Aluminum Hydroxide and Zinc Borate”, Journal of Fire Sciences; 32 (2) , 121-144 (March 2014) , DOI: 10.1177/0734904113500129

 

50.  E. Ibibikcan and C. Kaynak, “Usability of Three Boron Compounds for Enhancement of Flame Retardancy in Polyethylene-Based Cable Insulation Materials”, Journal of Fire Sciences; 32 (2) , 99-120 (March 2014) , DOI: 10.1177/0734904113500125

 

49.  C. Kaynak and A.C. Ozkaraca, “Use of Zinc Borate as the Third Component of a Traditional Brominated Flame Retardant System in Acrylonitrile Butadiene Styrene”, Fire and Materials,  37 (7) , 491-502 (November 2013) , DOI: 10.1002/fam.2142

 

48.  C. Kaynak and B.M. Sipahioglu, “Effects of Nanoclays on the Flammability of Polystyrene with Triphenyl Phosphate Based Flame Retardants”, Journal of Fire Sciences,  31 (4) , 339-355 (July 2013) , DOI: 10.1177/0734904112473729

 

47.  S. Sankal and C. Kaynak, “Using Various Techniques to Characterize Oxidative Functionalized and Aminosilanized Carbon Nanotubes for Polyamide Matrix”, Journal of Reinforced Plastics and Composites,   32 (2) , 75-86 (January 2013) , DOI: 10.1177/0731684412466315

 

46.  N.A. Isitman and  C. Kaynak, “Effect of Partial Substitution of Aluminum Hydroxide With Colemanite in Fire Retarded Low-density Polyethylene”, Journal of Fire Sciences,  31 (1) , 73-84 (January 2013) , DOI: 10.1177/0734904112454835

 

45.  H. Balakrishnan, A. Hassan, N.A. Isitman, and C. Kaynak , “On the Use of Magnesium Hydroxide Towards Halogen-Free Flame-Retarded Polyamide-6/Polypropylene Blends”, Polymer Degradation and Stability,  97 (8) , 1447-1457 (August 2012) , DOI: 10.1016/j.polymdegradstab.2012.05.011

 

44.  N.A. Isitman, M. Dogan, E. Bayramli, and C. Kaynak, “The Role of Nanoparticle Geometry in Flame Retardancy of Polylactide Nanocomposites Containing Aluminium Phosphinate”, Polymer Degradation and Stability, 97 (8) , 1285-1296 (August 2012) , DOI: 10.1016/j.polymdegradstab.2012.05.028

 

43.  N.A. Isitman, B.M. Sipahioglu and C. Kaynak, “Nanomorphology and Fire Behaviour of Polystyrene/Organoclay Nanocomposites Containing Brominated Epoxy and Antimony Oxide”, Polymers for Advanced Technologies, 23 (6) , 984-991 (June 2012) , DOI: 10.1002/pat.2001

 

42.  A.C. Ozkaraca and C. Kaynak , “Contribution of Nanoclays to the Performance of Traditional Flame Retardants in ABS”, Polymer Composites,  33 (3) , 420-429 (March 2012) , DOI: 10.1002/pc.22165

 

41.  T. Orhan, N.A. Isitman, J. Hacaloglu and C. Kaynak , “Thermal Degradation of Organophosphorus Flame-Retardant Poly(methyl methacrylate) Nanocomposites Containing Nanoclay and Carbon Nanotubes”, Polymer Degradation and Stability,  97 (3) , 273-280 (March 2012) , DOI: 10.1016/j.polymdegradstab.2011.12.020

 

40.  N.A. Isitman, M. Aykol, and C. Kaynak , “Interactions at Fiber/Matrix Interface in Short Fiber Reinforced Amorphous Thermoplastic Composites Modified with Micro- and Nano-Fillers”, Journal of Materials Science,  47 (2) , 702-710 (January 2012) , DOI: 10.1007/s10853-011-5843-7

 

39.  N.A. Isitman and C. Kaynak , “Nanostructure of Montmorillonite Barrier Layers: A New Insight into the Mechanism of Flammability Reduction in Polymer Nanocomposites”, Polymer Degradation and Stabilit,y  96 (12) , 2284-2289 (December 2011) , DOI: 10.1016/j.polymdegradstab.2011.09.021

 

38.  T. Orhan, N.A. Isitman, J. Hacaloglu and C. Kaynak , “Thermal Degradation Mechanisms of Aluminium Phosphinate, Melamine Polyphosphate and Zinc Borate in Poly(Methyl Methacrylate)”, Polymer Degradation and Stability,  96 (10) , 1780-1787 (October 2011) , DOI: 10.1016/j.polymdegradstab.2011.07.019

 

37.  N.A. Isitman, M. Dogan, E. Bayramli, C. Kaynak, “Fire Retardant Properties of Intumescent Polypropylene Composites Filled with Calcium Carbonate ”, Polymer Engineering & Science,  51 (5) , 875-883 (May 2011) , DOI: 10.1002/pen.21901

 

36.  C. Kaynak and N.A. Isitman, “Synergistic Fire Retardancy of Colemanite, a Natural Hydrated Calcium Borate, in High-Impact Polystyrene Containing Brominated Epoxy and Antimony Oxide”, Polymer Degradation and Stability,  96 (5) , 798-807 (May 2011) , DOI: 10.1016/j.polymdegradstab.2011.02.011

 

35.  C. Kaynak, H.O. Gunduz and N.A. Isitman, “Use of Nanoclay as an Environmentally Friendly Flame Retardant Synergist in Polyamide-6”, Journal of Nanoscience and Nanotechnology,  10 (11) , 7374-7377 (November 2010) , DOI: 10.1166/jnn.2010.2768

 

34.  N.A. Isitman and C. Kaynak , “Tailored Flame Retardancy via Nanofiller Dispersion State: Synergistic Action Between a Conventional Flame-Retardant and Nanoclay in High-Impact Polystyrene”, Polymer Degradation and Stability,  95 (9) , 1759-1768 (September 2010) , DOI: 10.1016/j.polymdegradstab.2010.05.012

 

33.  N.A. Isitman and C. Kaynak , “Nanoclay and Carbon Nanotubes as Potential Synergists of an Organophosphorus Flame-Retardant in Poly(Methyl Methacrylate)”, Polymer Degradation and Stability,  95 (9) , 1523-1532 (September 2010) , DOI: 10.1016/j.polymdegradstab.2010.06.013

 

32.  N.A. Isitman, M. Aykol, and C. Kaynak , “Nanoclay Assisted Strengthening of the Fiber/Matrix Interface in Functionally Filled Polyamid 6 Composites”, Composite Structures,  92 (9) , 2181-2186 (August 2010) , DOI: 10.1016/j.compstruct.2009.09.007

 

31.  N.A. Isitman, M. Aykol, G. Ozkoc, G. Bayram, and C. Kaynak , “Interfacial Strength in Short Glass Fiber Reinforced Acrylonitrile-Butadiene-Styrene / Polyamide 6 Blends”, Polymer Composites, 31 (3) , 392-398 (March 2010) , DOI: 10.1002/pc.20815

 

30.  N.A. Isitman , H.O. Gunduz and C. Kaynak, “Halogen-Free Flame Retardants That Outperform Halogenated Counterparts in Glass Fiber Reinforced Polyamides”, Journal of Fire Sciences,  28 (1) , 87-100 (January 2010) , DOI: 10.1177/0734904109349594

 

29.  N.A. Isitman , H.O. Gunduz and C. Kaynak, “Nanoclay Synergy in Flame Retarded / Glass Fiber Reinforced Polyamide 6”, Polymer Degradation and Stability,  94 (12) , 2241 -2250 (December 2009) , DOI: 10.1016/j.polymdegradstab.2009.08.010

 

28.  C. Kaynak, G.I. Nakas and N.A. Isitman “Mechanical Properties, Flammability and Char Morphology of Epoxy Resin / Montmorillonite Nanocomposites”, Applied Clay Science,  46 (3) , 319 -324 (November 2009) , DOI: 10.1016/j.clay.2009.08.033

 

27.  H.O. Gunduz, N.A. Isitman, M. Aykol, and C. Kaynak, “Interfacial Interactions and Flammability of Flame Retarded and Short Fiber Reinforced Polyamides”, Polymer-Plastics Technology and Engineering,  48 (10) , 1046 -1054 (October 2009) , DOI: 10.1080/03602550903092575

 

26.  G.I. Nakas and C. Kaynak, “Use of Different Alkylammonium Salts in Clay Surface Modification for Epoxy-Based Nanocomposites”, Polymer Composites, 30 (3), 357 -363 (March 2009) , DOI: 10.1002/pc.20667

 

25.  C.C. Tasan and C. Kaynak, “Mechanical Performance of Resol Type Phenolic Resin / Layered Silicate Nanocomposites”, Polymer Composites, 30 (3), 343 -350 (March 2009) , DOI: 10.1002/pc.20591

 

24.  C. Kaynak, E. Akgul and N.A. Isitman  “Effects of RTM Mold Temperature and Vacuum On the Mechanical Properties of Epoxy/Glass Fiber Composite Plates”, Journal of Composite Materials, 42 (15), 1505-1521 (July 2008) , DOI: 10.1177/0021998308092204

 

23.  M. Aykol, N.A. Isitman, E. Firlar and C. Kaynak, “Strength of Short Fiber Reinforced Polymers: Effect of Fiber Length Distribution”, Polymer Composites, 29 (6), 644-648 (June 2008) , DOI: 10.1002/pc.20480

 

22.  C. Kaynak and C.C. Tasan, “Effects of Production Parameters on the Structure of Resol Type Phenolic Resin / Layered Silicate Nanocomposites”, European Polymer Journal, 42 (8), 1908-1921 (August 2006) , DOI: 10.1016/j.eurpolymj.2006.03.008

 

21.  C. Kaynak and S. Boylu“Effects of SiC Particulates on the Fatigue Behaviour of an Al-Alloy Matrix Composite”, Materials & Design, 27 (9), 776-782 (June 2006) , DOI: 10.1016/j.matdes.2005.01.009

 

20.  C. Kaynak and O. Cagatay, “Rubber Toughening of Phenolic Resin by Using Nitrile Rubber and Amino Silane”, Polymer Testing, 25 (3), 296-305 (May 2006) , DOI: 10.1016/j.polymertesting.2006.01.004

 

19.  C. Kaynak and Y.O. Kas, “Effects of Injection Pressure in Resin Transfer Moulding (RTM) of Woven Carbon Fiber/Epoxy Composites”, Polymers & Polymer Composites, 14 (1), 55-64 (February 2006) ,

 

18.  C. Kaynak, E.S. Erdiller, L. Parnas and F. Senel“Use of Split-Disk Tests For The Process Parameters of Filament Wound Epoxy Composite Tubes”, Polymer Testing, 24 (5), 648-655 (August 2005) , DOI: 10.1016/j.polymertesting.2005.03.012

 

17.  C. Kaynak, O. Orgun, and T. Tincer, “Matrix and Interface Modification of Short Carbon Fiber Reinforced Epoxy”, Polymer Testing, 24 (4), 455-462 (June 2005) , DOI: 10.1016/j.polymertesting.2005.01.004

 

16.  Y.O. Kas and C. Kaynak “Ultrasonic (C-scan) and Microscopic Evaluation of Resin Transfer Molded Epoxy Composite Plates”, Polymer Testing, 24 (1), 114-120 (February 2005) , DOI: 10.1016/j.polymertesting.2004.07.002

 

15.  C. Celikbilek, G. Akovali, and C. Kaynak “Modification of Epoxy by a Liquid Elastomer and Solid Rubber Particles”, Polymer Bulletin, 51(5-6), 429-435, (April 2004) , DOI: 10.1007/s00289-004-0231-y

 

14.  C. Kaynak, C. Celikbilek, and G. Akovali, “Use of Silane Coupling Agents to Improve Epoxy-Rubber Interface”, European Polymer Journal, 39(6), 1125-1132, (June 2003) , DOI: 10.1016/S0014-3057(02)00381-6

 

13.  C. Kaynak, A. Arikan, and T. Tincer, “Flexibility Improvement of Short Glass Fiber Reinforced Epoxy by Using a Liquid Elastomer”, Polymer, 44 (8), 2433-2439 (April 2003) , DOI: 10.1016/S0032-3861(03)00100-9

 

12.  A. Arikan, C. Kaynak, and T. Tincer, “Influences of Liquid Elastomer Additive on the Behaviour of Short Glass Fiber Reinforced Epoxy”, Polymer Composites, 23 (5), 790-805, (October 2002) , DOI: 10.1002/pc.10477

 

11.  C. Kaynak, A. Ozturk, and T. Tincer, “Flexibility Improvement of Epoxy Resin by Liquid Rubber Modification”, Polymer International, 51(9), 749-756, (September 2002) , DOI: 10.1002/pi.874

 

10.  C. Kaynak, E.Sipahi-Saglam, G. Akovalý, “Effects of Scrap Rubber Particles on the Mechanical Behaviour of  Epoxy”, International Journal of Polymeric Materials, 51 (1-2), 133-150, (2002)

 

9.  A. Ozturk, C. Kaynak, and T. Tincer, “Effects of Liquid Rubber Modification on the Behaviour of Epoxy Resin”, European Polymer Journal, 37(12), 2353-2363, (December 2001) , DOI: 10.1016/S0014-3057(01)00158-6

 

8.  C. Kaynak, and O. Mat, “Uniaxial Fatigue Behaviour of Filament-Wound Glass-Fiber /Epoxy Composite Tubes”, Composites Science and Technology, 61(13), 1833-1840, (October 2001) , DOI: 10.1016/S0266-3538(01)00084-7

 

7.  C. Kaynak, E.Sipahi-Saglam, G. Akovalý, “A Fractographic Study of Recycled Rubber Toughening in Epoxy”, Polymer, 42(9), 4393-4399, (April 2001) , DOI: 10.1016/S0032-3861(00)00734-5

 

6.  E.Sipahi-Saglam, G. Akovalý, C. Kaynak, M.Yetmez and N. Akkas“Studies on Epoxy Modified with Recycled Rubber”, Polymer Engineering and Science, 41(3), 514-521, (March 2001) , DOI: 10.1002/pen.10748

 

5.  C. Kaynak, A. Ankara and T.J. Baker , “Inclusion Induced Anisotropy of Short Fatigue Crack Growth in Steel”, Materials Science and Technology, 12(7), 557-562, (July 1996) ,

 

4.  C. Kaynak, A. Ankara and T.J. Baker , “Initiation and Early Growth of Short Fatigue Cracks at Inclusions”, Materials Science and Technology, 12(5), 421-426, (May 1996)

 

3.  C. Kaynak, A. Ankara and T.J. Baker , “A Comparison of Short and Long Fatigue Crack Growth in Steel”, International Journal of Fatigue, 18(1), 17-23, (January 1996) , DOI: 10.1016/0142-1123(95)00074-7

 

2.  C. Kaynak, A. Ankara and T.J. Baker , “Effects of Short Cracks on Fatigue Life Calculations”, International Journal of Fatigue, 18(1), 25-31, (January 1996) , DOI: 10.1016/0142-1123(95)00075-5

 

1.  C. Kaynak and A. Ankara , “Short Fatigue Crack Growth in Al 2024-T3 and Al 7075-T6”, Engineering Fracture Mechanics, 43(5), 769-778, (November 1992) , DOI: 10.1016/0013-7944(92)90007-2